131H5305 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: AKD102P3K7T2E20H2XGCXXXSXXXXAXBXCXXXXDX
The 131H5305 adaptive cooling drive offers a supply voltage range of 3 x 380 - 480 VAC, a typical shaft output of 5.5 kW, an efficiency of 0.97, and weighs 6.6 kilograms in the IP20 enclosure. Part of the AKD Adaptive Cooling Drives series by Danfoss, it features a continuous output current of 13 A.
Internal Product Review
The drive 131H5305, is a compact and efficient motor control unit. It features over 95% efficiency, a rated output current of 16.7 A and integrated braking resistor support. This drive is widely applied in industrial automation, robotics and packaging machinery.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The AKD series control drive 131H5305 is manufactured by Danfoss with the product code AKD102P3K7T2E20H2XGCXXXSXXXXAXBXCXXXXDX. Its rated power is 3.7 kW and it accepts input voltage range from a three phase 200 to 240 V AC, within the frequency range 50 Hz to 60 Hz. The drive’s rated input current is 15.0 A under full load and its maximum apparent input power is 6.2 kVA.
The 131H5305 drive’s maximum efficiency exceeds 95% at nominal operating conditions and its output voltage is adjustable from zero to input supply, along with an adjustable output frequency from 0 to 1000 Hz. Its rated output current is 16.7 A in continuous operating mode, while its peak overload rating is 110% for 60 seconds. The drive uses pulse width modulation with insulated gate bipolar transistors and it offers an adjustable switching frequency up to 8000 Hz. It incorporates internal DC bus connections and a brake resistor that can be connected at its BR terminal. The 131H drive provides stable output operations due to its internal DC bus capacitance and its control supply uses low voltage spring clamp terminals. Its analog input range is up to 10 V and the output range is 0 to 10 V at 20 mA, while its digital input is 24 VDC with optical isolation and its relay outputs are rated 30 VDC at 1 A.
The 131H5305 drive permits relative humidity rating of 5 to 85%, non-condensing and its favorable altitude rating is 0 to 1000 meters without derating, while its derating is recorded as 1.5% of current per 100 meters above 1000 meters. It requires vertical mounting position with adequate airflow and its internal cooling is supported with a rear mounted axial fan. The unit’s discharge time for DC capacitors is at least 4 minutes and its protection class is IP20.
