195N3103

Product Description:

The 195N3103 from <\> lands in the AHF Advanced Harmonic Filters lineup and lines up as an RFI 1B Filter Module with some important details for industrial builds. This one carries a maximum rated current of 16 A and handles up to 480 V AC, which matches a range of automation needs. The shape comes in at 200 x 60 x 87 mm, so it finds a spot even when rack space gets tight or layouts need stacking. For the mounting, only a vertical setup works—sideways isn’t an option. Construction brings the IP20 enclosure rating, which puts up a basic safety barrier for fingers and dust in most indoor rooms.

A minimum clearance of 100 mm above and below this module lets air do the cooling, removing the need for fans or forced vents. The maximum voltage to ground sits at 300 V AC, matching with filtered circuits and not letting spikes sneak through. The wiring can stretch up to 100 m on 240 V screened cable and 25 m if it’s 380 to 480 V screened cable, so it stretches across sizable control cabinets or noisy plant floors without issues. This part locks onto VLT 2803-2875 series compatibility—no guessing games during a panel build, and everything should fit plug and play. Inside, standard compliance on EN 55011-1B EMC helps the box stay within emission limits, so projects pass audits on the first go.

Design puts the weight at 0.9 kg, which makes install possible solo with small hardware. For layout, side-by-side spacing isn’t required, saving a little more room in electrical enclosures when putting in multiple units. The outside may not look tough due to the IP20, but most jobs put this filter deep in the switchboard where spills or weather can’t reach.