EA700-26000 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher EA700-26000 is a Snaplock Limit Switch featuring a contact arrangement of 2 normally open and 2 normally closed contacts, made of silver alloy. It supports a current rating of 20 A at 125 Vac, with a maintained contact and lever action and uses butt contacts. The switch has a die-cast zinc housing and operates in temperatures from -20°C to 90°C.
Internal Product Review
The EA700-26000 is a Danaher Snaplock limit switch featuring maintained-contact lever action and a die-cast zinc housing. The 2 NO / 2 NC contact arrangement and 20 A rating at 125 Vac make the device a strong fit for repeatable machine interlocking. Operating capability from -20°C to +90°C adds excellent versatility for demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Danaher EA700-26000 is a rotary limit switch in the Snaplock Limit Switches series. This model combines a maintained lever mechanism with snap-acting contacts to establish angular end positions for conveyors, hoists, or indexing tables. By translating shaft rotation into discrete electrical signals, the switch provides position feedback that can interrupt power or trigger control logic in industrial automation cells. It mounts directly on a machine shaft and trips cams at preset angles.
Beneath the cover, a set of 2 NO / 2 NC butt contacts forms dual isolated circuits for simultaneous signaling and power interruption. These contacts are fabricated from a silver alloy, a material chosen for low resistance and resistance to arc erosion at currents up to 20 A on 125 VAC lines. Clockwise motion must overcome an operating torque of 6 in-lb before snap action occurs. The mechanism then trips after 55° of rotation and remains engaged while 55° of clockwise travel is maintained. Counterclockwise movement actuates the opposite cam after 25°, allowing bidirectional limit sensing. The butt contact geometry and maintained contact and lever action keep the circuits latched until the shaft returns. The switch operates from -20 °C to +90 °C, covering most industrial environments.
The enclosure is made from die-cast zinc, providing mechanical strength and electromagnetic interference shielding while keeping weight moderate. Cable entry uses a 1-11 1/2 NPT conduit thread that mates with standard rigid metallic conduit. The unit has an overall height of 7.06 in, providing clearance for lever travel when installed in the standard mounting style. Its geometry permits a single rotation sweep of 60° for positive cam engagement without overstressing the internal springs. A shaft diameter tolerance of 0.495 to 0.490 in accommodates common drive shafts. The unit attaches with the standard mounting pattern used throughout the series.
