TS50U Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The TS50U is a compact stepping motor with a supply voltage of 5 VDC and a frequency response of 100 kHz. Produced by Danaher as part of the Slo-Syn Stepping Motors series, it features a bearing life rated at L10 = 2 billion revolutions. The motor operates within a temperature range of -10°C to +100°C.
Internal Product Review
Danaher’s TS50U Stepping Motor provides efficient motion control with selectable bore sizes, 10 lb strain relief support, and 50/60 Hz frequency operation. Its Total Indicated Run-out remains within 0.005 inches. The motor operates at 100 kHz frequency with 0.3 A current draw under standard load.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Danaher designed the TS50U Stepping Motor as its industrial automation product to perform controlled motion operations. The device accepts operating ranges from 200 up to 1250 lines per revolution according to requirements. The specified resolution range makes this device suitable for various applications. The motor functions by receiving 120 VAC from the power supply.
The TS50U stepping motor operates between 50 and 60 Hz frequencies when it runs. A single-phase configuration makes design along with wiring setup easier to implement. The moment of inertia exists between 2.6×10⁻⁴ to 5.0×10⁻⁴ oz-in-sec². The rated acceleration is 100,000 rad/sec². The high-speed motion systems achieve fast performance due to it. The motor works effectively with a 5 VDC power supply that powers its internal circuit system. The system achieves frequency operation up to 100 kHz. A standard load requires the motor to pull 0.3 Amp from the power supply. The TS50U stepping motor operates in temperature conditions ranging from -10°C up to +80°C without additional accessories. When equipped with complements the motor functions within a temperature range of +100°C. The motor enables customers to select either a 0.250 in. or 0.375 in. bore size. The available sizing options provide multiple ways to connect shafts.
The TS50U stepping motor is engineered with a cable strain relief that supports 10 pounds of pulling force on the cord. Mechanical stresses cause cable failure but this component prevents such damage. The motor requires two #4-40 mounting screws which should be positioned at 180 degrees around their holes. Secure mounting is facilitated by the holes which are placed on a 1.812 bolt circle. The perpendicularity between the motor shaft mount remains within 0.005 inches of the Total Indicated Run-out. The standard build of the TS50U Stepping Motor contains a weight of 3.63 kilograms.
