HS35060073010 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher HS35060073010 is part of the Dynapar Encoders series and has a bore size of 1/2 inch and a weight of up to 16 ounces. It features a pulse rate of 600 PPR, operates with a maximum shaft speed of 3600 RPM, and offers a single-ended, unidirectional signal format. The encoder includes a NEMA4/IP66 enclosure rating and supports a 6-pin connector termination.
Internal Product Review
The HS35060073010 is a Danaher Dynapar encoder with 600 PPR output and a single-ended, unidirectional signal format. NEMA4/IP66 protection and a 100 kHz minimum frequency response make the unit a very capable choice for dependable motion feedback in demanding industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HS35060073010 is an incremental rotary encoder manufactured by Danaher for the Dynapar Encoders series. The unit is intended for general-purpose motion control where a controller needs reliable shaft position or speed data. A 1/2-inch hollow bore slides directly over the motor shaft, and a slotted-hole mount allows the housing to be aligned without custom brackets. Once installed, the rotating code wheel and optical sensor convert mechanical motion into electrical pulses that interface with inverters, PLC high-speed counters, or panel tachometers in industrial automation cells.
Its electrical interface produces 600 PPR, providing 0.6-degree resolution per revolution so mid-range drives can maintain a precise velocity loop. The sensing circuit tracks transitions up to 100 kHz, which exceeds the frequency required at the maximum permitted mechanical speed and helps prevent missed counts at high speeds. The output uses single-ended, unidirectional signaling, minimizing cable conductors while satisfying devices that require a forward-count channel. An open-collector driver with 2.2 kΩ pull-ups sinks current, while external logic supplies the line voltage. Mechanical rotation may reach a maximum of 3600 rpm without risking bearing damage. The housing carries a NEMA 4/IP66 rating, preventing rain, washdown spray, and airborne dust from entering. The operating electronics draw no more than 100 mA, keeping heat generation low inside sealed panels.
The shaft tolerates 40 lb of radial force and 30 lb of axial thrust, permitting direct belt tension or light pulley loads without separate support bearings. Internal assemblies withstand shocks of 50 G for 11 ms, helping preserve accuracy during machine vibration or sudden impacts. Starting torque is limited to 5.0 oz-in, so small servo motors can overcome static friction easily at startup. A sealed six-pin connector provides terminations for power and channel outputs. The encoder has an overall mass of 16 oz, which limits the weight added to compact drive assemblies and simplifies mounting where available space is restricted.
