HR62503600A01PS Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danaher HR62503600A01PS is part of the Dynapar Encoders series and features a 7-pin side connector, a 3/8 inch shaft diameter, and a resolution of 360 pulses per revolution. This flange-mounted encoder has a NEMA4/IP66 enclosure rating and supports a maximum shaft speed of 10,000 RPM. It offers a minimum frequency response of 100 kHz, with an open collector output circuit and index channel included.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HR62503600A01PS is an incremental rotary encoder manufactured by Danaher for the Dynapar Encoders series. As a feedback device, it attaches to a motor or machine shaft and converts mechanical rotation into electrical pulse trains so drive controllers can monitor position and speed in automated equipment. This model produces 360 PPR, providing one pulse for every degree of shaft rotation and supporting moderate positional accuracy. The quadrature channels also allow a compatible controller to determine the direction of rotation while tracking shaft movement.
Its housing carries a NEMA 4/IP66 rating, so the sealed body resists dust ingress and powerful water jets encountered in food processing, packaging, and outdoor machinery. The encoder tolerates shaft speeds up to 10,000 rpm without losing signal integrity. Its electronics respond to transitions as high as 100 kHz, allowing fast rotating axes to be monitored without missing counts when the operating speed and pulse rate remain within the device limits. Internal power consumption is limited to 80 mA, which reduces the load on the control power supply. The sealed housing also helps protect the internal code wheel and sensing components from contaminants that could interfere with pulse generation.
The power stage accepts up to 26 VDC, providing sufficient headroom for operation on common 24 V control buses while retaining compatibility with the 5 V minimum input. An open-collector output can sink as much as 40 mA, allowing it to drive optically isolated inputs or longer cable runs when an external 2.2 kΩ pull-up resistor is installed. Shaft concentricity is controlled to within 0.001 in TIR, helping maintain consistent alignment between the code wheel and sensor. The standard 3/8 in solid shaft fits many motor and machine interfaces, while flange mounting keeps the encoder body rigid during operation. A seven-pin side connector carries the A, B, and Z channels. The included Z-channel index pulse identifies one precise mechanical position during each complete shaft revolution.
