HC62540960241 Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher HC62540960241 is part of the Dynapar Encoders series and features a 4096 pulses per revolution resolution with a 3/8 inch shaft diameter. This flange mount encoder operates on 5-26 VDC input voltage and achieves a maximum shaft speed of 10,000 RPM. It offers a NEMA 4/IP66 enclosure rating and has a frequency response up to 250 kHz.
Internal Product Review
The HC62540960241 is a Danaher Dynapar encoder with differential no-index output and 4096 PPR resolution. Flange-mount construction and NEMA 4/IP66 enclosure protection support dependable installation in demanding industrial service. A 250 kHz frequency response highlights strong signal performance for high-speed motion feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HC62540960241 is a rotary incremental encoder built by Danaher for the Dynapar Encoders series. This product attaches to rotating equipment and converts mechanical motion into digital pulses so that drives and PLCs can calculate speed, direction, and relative displacement. A flange-mounted housing and sealed shaft interface allow the unit to serve as a reliable feedback source on conveyors, web lines, or light-duty machine tools. Its compact design supports precise position sensing in continuous production environments where installation space may be limited.
To withstand washdowns, the encoder carries a NEMA 4/IP66 rating that protects it against dust and powerful water jets. Its electronics accept 5–26 VDC, and the line driver generates complementary outputs at the supply voltage while drawing no more than 80 mA. Balanced differential signaling helps keep pulses clean over long cable runs and in areas affected by electrical noise. The sensing circuitry tracks edges at 250 kHz, allowing reliable counting at elevated rotational speeds. Each turn is subdivided into 4096 PPR, providing 12-bit angular resolution for applications that require detailed motion feedback. The code disc tolerates speeds up to 10,000 RPM, allowing the unit to follow rapid motor acceleration without damage.
The mechanical interface uses a flange-mount pattern, and the stainless-steel shaft measures 3/8 in in diameter. Motion can begin with only 2.5 oz-in of starting torque, while the internal code wheel has a moment of inertia of 2.83 × 10⁻⁴ oz-in-sec² to minimize acceleration load on the connected motor. Bearing loads of up to 40 lb radial and 30 lb axial support direct coupling to suitable pulleys or gears. The encoder operates continuously from 0 to +70 °C, making it suitable for general-purpose industrial environments and control cabinets. Signals leave through a 10-pin side-mount connector. The differential line driver does not include an index channel, and its output level follows the supply voltage so compatible receivers can reject common-mode noise over extended cable lengths.
