H2200500325EF Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danaher H2200500325EF is part of the Dynapar Encoders series and features a resolution of 50 PPR with a 3/8 inch hub bore. It supports a maximum shaft speed of 10,000 RPM, has an output type of 5 V differential line driver, and operates in temperatures from -40 to 85 °C. The enclosure is rated NEMA4/IP66 and the unit weighs up to 10 ounces, with a 36 inch sealed cable for termination.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The H2200500325EF is an incremental rotary encoder produced by Danaher and supplied under the Dynapar Encoders series. The device mounts over a driven shaft and translates mechanical rotation into two phased square-wave channels that motion controllers use for real-time speed and position feedback. By delivering this feedback directly at the machine axis, the encoder supports closed-loop regulation of conveyors, indexing tables, and light-duty servo stages commonly found in packaging, printing, and general material-handling applications.
A resolution of 50 PPR means that one mechanical revolution produces 50 pulses per channel, giving controllers 200 counts after quadrature decoding. The sensing electronics switch cleanly at frequencies up to 100 kHz, allowing the encoder to track high-speed shafts without missing transitions. Mechanical limits include a maximum shaft speed of 10,000 rpm, a starting torque of 3.0 oz-in, and a moment of inertia of 3.0 × 10⁻⁴ oz-in-s². These characteristics permit quick acceleration when the encoder is installed on small drives. Power demand remains low because the input circuits draw no more than 80 mA. A sealed housing rated NEMA 4/IP66 blocks dust and water jets, while a stainless steel hub with a 3/8 in bore slips directly over the machine shaft. A 36 in side-exit sealed cable carries the differential output signals and simplifies wiring inside compact enclosures.
The operating temperature extends from -40 °C to +85 °C, allowing the encoder to function in refrigerated warehouses and high-temperature machinery areas. Within this range, the internal driver delivers complementary A, B, and index signals through a 5 V differential line driver (7272), providing noise rejection over long cable runs. Electrical timing maintains phasing of 90° ± 22.5° between channels and symmetry of 180° ± 18° within each cycle. This timing provides equal high and low intervals for accurate velocity measurement. The encoder has an overall mass of 10 oz, so it places minimal additional load on the bearings of lightweight shafts.
