DMC2 51540P Danaher
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
32 Seconds
The Danaher DMC2 51540P motion controller, part of the DMC Motion Controllers series, operates with a peak current of 40A. It features an efficiency of 95%, a continuous power output of 7.4 kW at 40ºC, and operates with a 3 phase 400 VAC input voltage. The unit measures 234mm x 227mm x 160mm and weighs 6.8 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The high-performance DMC2 51540P Motion Controller of Danaher company operates within advanced industrial automation. This motion controller belongs to the DMC² Motion Controllers Series and operates for exact motor control needs. The controller operates with 11 A 3-phase 400 V AC power. It outputs 11 A/400 V AC equally to the motor.
The DMC2 51540P motion controller provides adjustable output frequency ranging from 0 up to 400 Hz. The controller delivers precise control to servo motors as well as asynchronous motors. The control system features encoder feedback as an element that enables accurate motor position detection. It functions as a digital incremental encoder closed-loop control system interface. This controller has an IP20 rating that makes it suitable for indoor cabinet installation. It does not include protection against either water or dust entry in open-air settings. The DMC2 51540P motion controller features a CANopen interface for robust communication. It ensures smooth integration into fieldbus-based industrial automation systems. The unit's weight comes to 6.5 kilograms due to its solid design structure. The control panel standards make this controller easy to place due to its compact measurement dimensions. This product functions between +40 °C and 0 °C of ambient temperature. It operates properly under relative humidity conditions between 5% to 95% non-condensing.
The DMC2 51540P motion controller must be installed in pollution degree 2 environments. The device has an operational temperature range suitable for 60/75°C wire insulation. The specified safe storage conditions for this device span between -25 °C and +55 °C. The encoder holds CE certification as well as limited functionality for copper wiring. High voltage warning systems and safety discharge indicators are featured in this device. Among the capacitors built inside the encoder, the discharging operation lasts more than one minute.
