DMC2 50412-CAN Danaher
Wake Industrial LLC is not an authorized distributor of this product.
The Danaher DMC2 50412-CAN is a motion controller from the DMC Motion Controllers series, offering a continuous output power of 1.9 kW and a peak current of 12 Amps. It has an input voltage of 570 VDC and operates with 95 percent efficiency. The controller features IP20 protection, a continuous RMS current of 3 Amps, and weighs 2.7 kilograms.
Internal Product Review
The DMC2 50412-CAN is a Danaher motion controller with 1.9 kW continuous output power and 95% efficiency. A 2 kHz current loop bandwidth paired with 12 A peak current supports crisp response and strong transient handling in servo applications. IP20 protection makes this unit a dependable choice for enclosed industrial control systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DMC2 50412-CAN is a compact motion control drive manufactured by Danaher and supplied under the DMC Motion Controllers series. Designed as a central element in multi-axis automation, it converts power from a high-voltage DC bus into precisely regulated phase currents while exchanging real-time data over a CAN interface. The unit coordinates servo motors to provide accurate position, speed, and torque regulation in material-handling cells and other industrial machinery. Its compact format supports installations in which several motion axes must operate within a limited amount of cabinet space.
Continuous power capability reaches 1.9 kW, allowing the controller to operate medium-frame servo motors without thermal derating. The input accepts a nominal DC bus voltage of 570 VDC, and a continuous output current of 3 A RMS supports sustained motion profiles. Brief overloads are handled with a peak current of 12 A. Closed-loop regulation is aided by a current-loop bandwidth of 2 kHz, while conversion efficiency reaches 95%, resulting in 60 W of heat that must be removed. For accurate phase monitoring, the drive senses across a ±50 mV bridge, and motors with an inductance of at least 10 mH meet its ripple requirements. A separate continuous DC current limit of 3.5 A controls copper losses during low-speed holding.
The controller has an IP20 protection rating, so it must be mounted inside a switch cabinet with clean airflow. Its 46 mm width and 234 mm height support high-density rack layouts, while its total mass of 2.7 kg reduces the load placed on the mounting structure. A base switching frequency of 4 kHz works with the current loop to minimize audible noise while preserving current fidelity. The wide speed ratio of 1:9000 allows connected axes to move from slow positioning to high-velocity indexing with one drive configuration. Cabinet placement must provide sufficient wiring clearance around the housing and an unobstructed path for heat removal. These installation requirements help the controller maintain stable operation during sustained motion cycles without requiring excessive panel space.
