800-1706 Copley Controls
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
26 Seconds
The 800-1706 is a digital loop module from the XENUS Digital Loop Modules series by Copley Controls. It features one 12-bit analog input, one 12-bit analog output, and two 16-bit analog inputs. This module supports a digital encoder frequency of 5 MHz and provides six digital outputs and fifteen digital inputs.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 800-1706 module is a digital loop controller produced by Copley Controls and delivered within the XENUS Digital Loop Modules series. It forms the interface between motion processors and power stages, translating analog, digital, and encoder signals into deterministic commands used throughout automated cells and test stands. That role helps coordinate control data with feedback devices so upstream motion hardware can react predictably during machine operation.
Signal handling begins with one 12-bit analog input and one 12-bit analog output for basic reference signals, while two 16-bit analog inputs capture higher-resolution data. For discrete control there are 15 digital inputs and 6 digital outputs, each filtered in firmware for debounce and fault detection. Incremental feedback is accepted through quadrature encoders, with a counter that processes edges at 20 MHz quadrature count rate, supports sine-cosine devices up to 230 kHz analog encoder bandwidth, and latches differential digital streams at 5 MHz digital encoder bandwidth.
Interpolation of fine analog tracks reaches 1024 counts per cycle, boosting position resolution without extra wiring. Two power taps supply external sensors, each rated for +5 Vdc @ 400 mA encoder supply, and counted among the unit’s two encoder power outputs. A pair of Mto inputs accepts motor thermistor signals, and an over-temperature threshold of 80 °C forces orderly shutdown when exceeded.
Protection includes an 400 Vdc overvoltage trip and a 60 Vdc undervoltage trip. Wake Industrial stocks this module and offers same-day shipping. Quotes remain valid for 30 days, and the chat tool on the website answers questions.
Frequently Asked Questions about 800-1706:
Q: How many 12-bit analog inputs are available on the 800-1706 module?
A: The 800-1706 features one 12-bit analog input for signal processing.
Q: What is the maximum supported digital encoder frequency for the 800-1706?
A: This model offers a digital encoder frequency capability of up to 5 MHz.
Q: At what voltage does the overvoltage trip trigger on the 800-1706?
A: The overvoltage trip is set to activate at 400 Vdc for this module.
Q: How many digital input channels does the 800-1706 support?
A: There are 15 digital inputs provided on the Copley Controls 800-1706.
Q: What is the analog interpolation rate of the 800-1706?
A: The analog interpolation is rated at 1024 counts per cycle on this device.
