800-608A Copley Controls
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The 800-608A is a PWM motor amplifier manufactured by Copley Controls and is part of the DC Servo Amplifiers series. It operates at a supply voltage of 50 VDC and uses a power connector with 5 pins on J1. The amplifier includes a 16-pin signal connector and features specific pins for current monitoring, ground, and reference input.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 800-608A servo amplifier is built by Copley Controls for the DC Servo Amplifiers series. It functions as a motor-drive interface, converting low-level motion commands into controlled armature current for brushed or brushless DC servomotors. That role makes it suitable for automated machinery, packaging lines, and semiconductor stages that require stable response and compact drive hardware.
The unit operates as a PWM Motor Amplifier, using fast switching to maintain linear current while limiting heat generation. It accepts up to 50 VDC on the supply rail, which fits systems built around 24 to 48 V bus architectures. Power wiring terminates on the compact J1, 5 Pins connector, while command, feedback, and diagnostic circuits route through the separate J2, 16 Pins header to keep logic and power paths distinct.
Within the signal section, motor current can be monitored at J2-8, J2-9, which supports external current-loop supervision when tighter regulation is needed. Drive output reaches the machine through J1-1, J1-2, and the DC input enters through J1-5 to separate bus power from control traces. Internal analog rails are available at J2-1 (+15V), J2-3 (-15V) for sensors, comparators, and related interface circuitry.
Wake Industrial offers same-day shipping options for this amplifier and keeps quotations valid for 30 days. The chat tool available on the website can be used for questions about pin assignments, fault codes, or other general details. This combination helps buyers confirm connection points quickly, compare timing with maintenance schedules, and place orders with less delay during urgent replacement or repair planning.
Frequently Asked Questions about 800-608A:
Q: What type of amplifier is the Copley Controls 800-608A?
A: The 800-608A is a PWM motor amplifier designed to control DC servomotors precisely.
Q: What supply voltage does the Copley Controls 800-608A require?
A: This amplifier operates with a supply voltage of 50 VDC for powering connected motors.
Q: What type of power connector is used on the 800-608A amplifier?
A: The power connector for the 800-608A is a 5-pin J1 connector.
Q: Which pins serve as motor outputs on the 800-608A amplifier?
A: Motor outputs on the 800-608A utilize pins J1-1 and J1-2 for connection to the motor.
Q: Where are the reference input pins located on the 800-608A amplifier?
A: Reference input for the amplifier is supplied via J2-4 and J2-5 pins on the signal connector.
