XMS2-W0375ANN-01AETT0NNNN-S04RSN1NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914510381
The Bosch Rexroth Indramat XMS2-W0375ANN-01AETT0NNNN-S04RSN1NNNN0NN is a single-axis inverter from the XMS2 ctrlX Drives series. It features a multi-Ethernet communication method with Sercos III protocol and provides a continuous output current of 221 A at 4 kHz. The drive has an IP20 protection rating, operates with a max DC bus voltage of 900 V, and weighs 18.9 kg.
Internal Product Review
The XMS2-W0375ANN-01AETT0NNNN-S04RSN1NNNN0NN is a single-axis ctrlX DRIVE inverter engineered for high-performance motion control. Multi-Ethernet communication with Sercos III support gives the unit fast network integration and dependable deterministic control. A 221 A continuous output current at 4 kHz and Safe Torque Off make the drive a strong choice for demanding machine platforms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XMS2-W0375ANN-01AETT0NNNN-S04RSN1NNNN0NN is a single-axis power section manufactured by Bosch Rexroth Indramat within the XMS2 ctrlX Drives series of the ctrlX DRIVE product group. As a second-generation inverter, it converts power from the shared DC bus into regulated three-phase power for servo or induction motors in packaging lines, handling systems, and other automated machinery. The unit integrates a control panel for local parameter access, supports Multi-Ethernet communication, and uses the Sercos III protocol to exchange real-time data with higher-level motion controllers.
During continuous operation at a switching frequency of 4 kHz, the power stage supplies 221 A, while short-term loads can draw up to 375 A. The shared DC-link connector is rated for 300 A, allowing it to carry power between compatible modules. The DC link operates at a nominal voltage of 750 V and can tolerate surges up to 900 V without derating. Internal airflow guided by the heat sink fins removes heat generated by the power electronics. A capacitance to ground of 2 × 100 nF reduces conducted emissions, while an insulation resistance of 1 MΩ maintains electrical isolation between energized circuits and the metal frame. The module is designed for a single axis and operates as an inverter within the drive system.
The housing is 250 mm wide, 196.5 mm deep, and 340.5 mm high. The assembly weighs 18.9 kg, which supports installation in an appropriately rated drive cabinet. At rated current, the unit dissipates 2146 W of power, so the internal airflow path and required cabinet clearances must remain unobstructed. The built-in Safe Torque Off channel disables torque-producing power without requiring external motor contactors for that safety function. An enclosure rating of IP20 provides protection against contact with hazardous internal parts but does not protect the drive from water. The unit should therefore be installed in a clean, protected cabinet suitable for industrial electrical equipment. It is supplied without a motor connector set, so motor terminations require compatible application-specific cabling.
