Product Description:

The XMS2-W0070ANN-01NETT0NNNN-S03RSN1NNNN0NN is a single-axis inverter from Bosch Rexroth Indramat’s XMS2 ctrlX Drives series. As a second-generation ctrlX DRIVE unit, it manages power conversion between a shared DC bus and one motor. Multi-Ethernet communication with Sercos III allows the drive to exchange setpoints and diagnostics with controllers in automated machinery.

At a 4 kHz switching frequency, the power stage delivers 35 A during continuous operation. Short-duty peaks reach 70 A, giving the axis extra current for acceleration or load shocks. The inverter operates from a nominal DC link of 750 V, and protective circuitry disconnects the bus at 900 V to prevent overstress in the power section.

The drive connects to the common bus through conductors sized for 120 A, and inrush is limited to 4 A to reduce stress on upstream fusing, while control electronics and gate drivers consume only 120 W. Cooling relies on internal air cooling, which directs airflow across the IGBT module, and the housing carries an IP20 rating for cabinet use. Safe Torque Off is included as the safety function, and a mass of 4.25 kg with dimensions of 309 mm × 75 mm × 196.5 mm supports dense multi-axis layouts. Its narrow width also leaves room for neighboring modules in tightly packed enclosures.

Wake Industrial stocks this drive for replacement and maintenance needs. Same-day shipping is available for time-critical orders, which can help reduce downtime when an inverter must be replaced. Quotations remain valid for 30 days to simplify budgeting and approval.