XMS2-W0054ANN-02NETM5ECNN-S06RSN1NNNP5NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914522060
The Bosch Rexroth Indramat XMS2-W0054ANN-02NETM5ECNN-S06RSN1NNNP5NN is a single-axis inverter from the XMS2 ctrlX Drives series and belongs to the ctrlX DRIVE product group. It features a maximum output current of 54 Amps at 4 kHz, supports Multi-Ethernet communication with a Sercos III protocol, and includes SafeMotion hardware safety. The drive operates with a nominal DC bus voltage of 750 V, has a mass of 4.25 kg, and utilizes internal air cooling with an airflow of 129 cubic meters per hour.
Internal Product Review
The XMS2-W0054ANN-02NETM5ECNN-S06RSN1NNNP5NN is a single-axis inverter in the Bosch Rexroth ctrlX DRIVE platform with internal air cooling. Multi-Ethernet communication with Sercos III support makes integration into high-performance motion networks straightforward. A 54 A maximum output current at 4 kHz and SafeMotion functionality make this unit a strong choice for precise, safety-focused drive applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XMS2-W0054ANN-02NETM5ECNN-S06RSN1NNNP5NN is an inverter from Bosch Rexroth Indramat in the XMS2 ctrlX Drives series. As a drive component, it converts energy from a shared DC bus into variable motor voltage and frequency, forming the actuator side of the ctrlX DRIVE automation platform. The integrated ctrlX DRIVE plus control section allows the unit to mount directly in multi-axis lineups without additional interface modules. It supplies controlled motion for one machine axis under the second-generation architecture. This arrangement reduces the number of separate components required between the power supply and the connected motor.
The drive controls one mechanical line because it has a single-axis configuration. Command and diagnostic traffic pass through a Multi-Ethernet hardware port, while real-time motion data can be exchanged over Sercos III. Power processing uses a nominal DC-bus voltage of 750 V, and the link connects to neighboring supply modules through a 120 A connection. Internal capacitance of 1.7 mF helps buffer the shared bus during changing load conditions. At the lowest selectable switching frequency, the power stage can deliver up to 54 A. The available pulse-width modulation frequencies are 4, 8, 12, and 16 kHz, allowing the operating frequency to be selected according to acoustic and dynamic requirements. SafeMotion provides integrated functional safety, and a multi-encoder interface accommodates different feedback devices. The controller electronics draw 120 W from the auxiliary supply. The unit is supplied without a control panel or motor connector set.
Internal-air cooling moves 129 m³/h through the heat sink, so the unit does not require an external blower. Its IP20 protection rating supports cabinet installation while shielding users from contact with live internal parts. The housing measures 75 mm wide, 196.5 mm deep, and 309 mm high, allowing closely spaced installation within a drive column. Its transport mass is 4.25 kg, which should be considered when selecting mounting hardware and cabinet supports. The housing contains the SafeMotion electronics while retaining the multi-encoder interface required for supported feedback systems. The inverter operates solely as a motor-control power stage and receives energy through the shared DC bus. Air must be able to pass through the heat sink without obstruction to maintain effective cooling during continuous operation.
