XMS2-W0036ANN-02NETM5ECNN-S05RSN1NNNP5NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914521600
The Bosch Rexroth Indramat XMS2-W0036ANN-02NETM5ECNN-S05RSN1NNNP5NN is part of the XMS2 ctrlX Drives series and belongs to the ctrlX DRIVE product group. This single-axis inverter features a Multi-Ethernet communication method including Sercos III protocol, with a protection rating of IP20 for DC 750 V. It provides a continuous output current of 18 A at 4 kHz, maximum output current of 36 A at 4 kHz, and uses internal air cooling with an airflow of 36 m3/h.
Internal Product Review
The XMS2-W0036ANN-02NETM5ECNN-S05RSN1NNNP5NN is a single-axis inverter in the Bosch Rexroth Indramat XMS2 ctrlX Drives platform. Multi-Ethernet communication with Sercos III support gives the drive strong network flexibility and clean integration into modern motion architectures. Continuous output at 18 A and SafeMotion make the drive a strong choice for controlled, safety-focused machine performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XMS2-W0036ANN-02NETM5ECNN-S05RSN1NNNP5NN is a single-axis inverter module manufactured by Bosch Rexroth Indramat for the XMS2 ctrlX Drives series. Integrated into the ctrlX DRIVE platform, it converts shared DC-bus energy into regulated motor power for positioning, conveying, and process tasks in automated machinery. Its compact housing supports dense mounting inside control cabinets, while Multi-Ethernet connectivity links the axis to modern real-time motion networks.
The drive operates from a nominal DC-link voltage of 750 V and provides a continuous output current of 18 A at 4 kHz. Internal air cooling moves 36 m³/h across the heat sink, and the blower is contained within the unit, eliminating the need for external ducting. Built with the ctrlX DRIVE plus control section, the electronics consume 79 W and dissipate 169 W of heat at rated load. Communication with controllers is handled through a Multi-Ethernet interface that also transmits Sercos III telegrams for cyclic commands and feedback. The housing measures 309 mm high, 50 mm wide, and 196.5 mm deep, supporting installation in space-constrained cabinets. Its insulation resistance is 1 MΩ.
During dynamic operation, the inverter delivers up to 36 A at 4 kHz, while an overvoltage threshold of 900 V trips the DC bus to protect internal semiconductors. The drive includes the SafeMotion safety option and a built-in multi-encoder interface. It does not include auxiliary power sections, and the control panel and motor connector set are omitted so wiring and parameter settings can follow project requirements. The module has a mass of 2.8 kg, which reduces the load on cabinet mounting structures. An enclosure rating of IP20 applies when the module is installed behind a protective cabinet door. The housing protects against contact with hazardous internal components but requires an appropriate enclosure to prevent exposure to water and fine contaminants.
