XM2200.01-01-31-31-301-NN-100N2NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911380330
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XM2200.01-01-31-31-301-NN-100N2NN is a PLC that is part of the XM21 IndraControl Systems series and features an Intel Atom E660T processor with a 1300 MHz CPU frequency. It includes 512 MB of DRAM, a 1 GB SD mass storage, and supports up to 63 S20 modules with a maximum S20 bus current of 2 A. The device also offers a Sercos Master MultiEthernet fieldbus, an Ethernet RJ45 port, and can be expanded with three additional modules via XA-BS02.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2200.01-01-31-31-301-NN-100N2NN is a controller base unit produced by Bosch Rexroth Indramat as part of the XM21 IndraControl Systems series. Delivered as a PLC basis system, it forms the primary execution layer for deterministic motion and logic tasks in automated lines, pick-and-place gantries, and packaging stations. Acting as the heart of an IndraMotion MLC architecture, the hardware orchestrates drives, decentralized I/O, and user HMI nodes across real-time industrial networks.
At the core of the hardware is an Intel Atom E660T processor clocked at 1300 MHz; this combination determines scan time and allowable software tasks. Program code executes from 512 MB DRAM, while variable data that must survive power cycling is retained in 128 kB of remanent memory. Non-volatile application files are stored on an SD card with at least 1 GB of mass-storage capacity. Communications to supervisory PCs or vision systems are handled through a single 1 x 1 Gbit RJ45 Ethernet interface, and the optional OCI channel provides an additional protocol tunnel for plant-wide diagnostics. A nominal supply of 24 V DC powers both electronics and the integrated I/O backplane; brown-out tolerance is supported by internal capacitors. One host USB port and one device USB port allow service imaging or connection of barcode scanners without adding external hubs.
The controller expands locally by three XA-BS02 side modules, and remote signal acquisition is possible through an S20 bus that carries up to 63 modules while sourcing a maximum of 2 A to that segment. Two Sercos III fiber ports are present, but the board also provides an on-board Sercos Master (MultiEthernet) channel so the unit can command drives using real-time telegrams and, in the same cycle, exchange TCP/IP traffic with standard switches. The IndraMotion MLC runtime keeps axis profiles synchronized across the Sercos ring, maintaining deterministic cycle times even when the full complement of extension and S20 modules is installed.
Frequently Asked Questions about XM2200.01-01-31-31-301-NN-100N2NN:
Q: What type of processor is used in the XM2200.01-01-31-31-301-NN-100N2NN controller?
A: The XM2200.01-01-31-31-301-NN-100N2NN utilizes an Intel Atom E660T processor for reliable automation control.
Q: What is the CPU frequency of the XM2200.01-01-31-31-301-NN-100N2NN system?
A: This controller operates at a CPU frequency of 1300 MHz, offering fast data processing for control tasks.
Q: How many extension modules can be connected to the XM2200.01-01-31-31-301-NN-100N2NN?
A: Three extension modules can be integrated with this controller via XA-BS02 for system expansion.
Q: How many Sercos III ports does the XM2200.01-01-31-31-301-NN-100N2NN feature?
A: There are 2 Sercos III ports on this model, supporting advanced real-time networking.
Q: What is the minimum SD card capacity supported by the XM2200.01-01-31-31-301-NN-100N2NN for mass storage?
A: The mass storage on this model requires a minimum of 1 GB SD card.
