XM2200.01-01-31-31-001-NN-112N1NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911401303
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XM2200.01-01-31-31-001-NN-112N1NN is part of the XM21 IndraControl Systems series and operates with an Intel Atom E660T 1.30 GHz processor and 512 MB DRAM. This controller features a Sercos Master onboard fieldbus, OPC UA communication package, and supports up to 63 S20 modules with a 1 GB minimum mass storage. It has a protection rating of IP20 and operates within a temperature range of -25 to +60 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2200.01-01-31-31-001-NN-112N1NN is an embedded automation controller produced by Bosch Rexroth Indramat for the XM21 IndraControl Systems series. Intended for coordinated motion and PLC sequencing, it forms the central processing node that links drives, distributed I/O, and supervisory software within an industrial cell. By integrating fieldbus master capability and open communication services, the unit serves as the deterministic control core in packaging, handling, and assembly machinery.
The controller operates on a Intel Atom E660T 1.30 GHz processor that executes real-time logic while conserving panel energy. Working memory consists of 512 MB DRAM, and application data is stored on an internal flash drive of at least 1 GB. Network traffic moves through a 1 x 10/100/1000 Mbit/s Ethernet port that supports standard TCP/IP as well as real-time protocols. Interoperability with higher-level systems is achieved via a OPC UA communication package, permitting secure, model-based data exchange. Cabinet thermal design is simplified because peak demand remains below 36 W. The base unit accepts up to three inline extension modules, and a non-volatile area of 128 kB preserves counters and recipe indices through power cycling.
Drive coordination is handled by an on-board Sercos Master interface that delivers synchronous cyclic data to servo amplifiers. The logic section is powered from a 24 V DC SELV/PELV supply and tolerates input between 18 and 31.2 V DC without reset. Continuous service is specified from -25 to +60 °C, enabling installation in chilled rooms or high-temperature lines. With a housing rated at IP20, the device must reside inside a cabinet but requires no additional sealing. Up to 63 S20 remote modules can be registered on its bus, and these resources are managed under the IndraMotion MLC system configuration alongside the PLC + MOTB + TEC function package.
Frequently Asked Questions about XM2200.01-01-31-31-001-NN-112N1NN:
Q: What CPU is featured in the XM2200.01-01-31-31-001-NN-112N1NN system?
A: This controller is built with an Intel Atom E660T processor operating at 1.30 GHz.
Q: How many S20 modules can the XM2200.01-01-31-31-001-NN-112N1NN control?
A: It supports a maximum of 63 S20 modules for system expansion.
Q: Which communication protocol does the XM2200.01-01-31-31-001-NN-112N1NN support?
A: An OPC UA communication package is integrated into this unit.
Q: What Ethernet interface is available on the XM2200.01-01-31-31-001-NN-112N1NN?
A: The controller offers a single Ethernet interface with speeds up to 1 Gbit/s.
Q: What is the protection rating for the XM2200.01-01-31-31-001-NN-112N1NN?
A: This unit is protected to an IP20 rating, allowing for installation in dry, indoor environments.
