XM2100.01-01-31-31-301-NN-113N1NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911391316
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XM2100.01-01-31-31-301-NN-113N1NN is part of the XM21 IndraControl Systems series and is powered by an Intel E620T 600 MHz CPU with 512 MB DRAM. This controller offers one Gigabit Ethernet port, one USB host, one USB device port, and an SD card slot, all housed in a unit with IP20 protection and dimensions of 126.3 x 100 x 74.1 mm. It supports up to 63 S20 modules per station with a S20 bus rate of 100 megabits per second and operates within a -25 to +60 degree Celsius temperature range.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2100.01-01-31-31-301-NN-113N1NN is an embedded automation controller produced by Bosch Rexroth Indramat within the XM21 IndraControl Systems series. Installed at the head of an S20 I/O station, it executes real-time motion and logic tasks and exchanges data with higher-level networks through integrated interfaces. By combining processing, communication, and local bus management, the unit coordinates drives, sensors, and field devices in factory or machine-level automation environments.
Its processing core is an Intel E620T 600 MHz processor that handles deterministic control loops while reserving bandwidth for HMI and diagnostic services. Program execution is supported by 512 MB DRAM, allowing sizable IEC-61131 code and buffered process data to reside in memory without paging delays. For plant networking, the onboard Ethernet interface provides 1 × 1 Gbit/s throughput, enabling fast transfer of OPC UA, Modbus TCP, or Profinet traffic to supervisory computers. Locally, the S20 backplane communicates with terminal modules at 100 Mbit/s, so cycle-accurate data from digital and analog channels reaches the CPU without bottlenecks. Motion commands can be forwarded to Sercos drives with a minimum cycle time of 250 µs, aligning axis synchronization with highly dynamic machinery.
The controller draws 36 W at full load, including the energy required by attached S20 terminals, so cabinet power supplies can be sized accurately. It tolerates ambient temperatures from −25 to +60 °C, permitting installation in both refrigerated and warm processing zones without auxiliary climate control. The controller can address up to 63 per station S20 modules, while three XFE extension carriers expand configuration space for specialized functions. The electronics are powered from a nominal 24 V DC source within an allowable range of 18 to 31.2 V, and the IP20 enclosure measures 126.3 × 100 × 74.1 mm for DIN rail installation inside standard control panels.
Frequently Asked Questions about XM2100.01-01-31-31-301-NN-113N1NN:
Q: What is the processor specification of the XM2100.01-01-31-31-301-NN-113N1NN control system?
A: The XM2100.01-01-31-31-301-NN-113N1NN is equipped with an Intel E620T processor running at 600 MHz.
Q: How many S20 modules can be connected to the XM2100.01-01-31-31-301-NN-113N1NN?
A: This unit supports a maximum of 63 S20 modules per station.
Q: What Ethernet connectivity is available on the XM2100.01-01-31-31-301-NN-113N1NN?
A: The device offers one 1 Gbit/s Ethernet port for network connectivity.
Q: What is the operating temperature range of the XM2100.01-01-31-31-301-NN-113N1NN?
A: Operating temperature ranges from -25°C to +60°C for this model.
Q: How many SD card slots are present on the XM2100.01-01-31-31-301-NN-113N1NN?
A: One slot is provided for SD card storage expansion or data logging.
