XM2100.01-01-31-31-301-NN-112NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911397356
Ask for AvailabilityThe Bosch Rexroth Indramat XM2100.01-01-31-31-301-NN-112NNNN is part of the XM21 IndraControl Systems series and features a 600 MHz Intel E620T CPU with 512 MB DRAM. This controller offers a supply voltage of 24 V DC, a maximum power draw of 36 W, and supports up to 63 S20 modules with a bus rate of 100 Mbit/s. It is equipped with one Ethernet port, one USB device port, one USB host port, and one SD card slot, and has IP20 protection.
Internal Product Review
The XM2100.01-01-31-31-301-NN-112NNNN is an XM21 IndraControl system controller built around an Intel E620T CPU at 600 MHz. Support for up to 63 S20 modules and a 100 Mbit/s S20 bus rate gives the platform strong expansion capability for demanding machine control. IP20 protection and a 24 V DC supply make this unit a dependable choice for cabinet-based automation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2100.01-01-31-31-301-NN-112NNNN is a programmable automation controller produced by Bosch Rexroth Indramat for the XM21 IndraControl Systems series. The unit serves as the CPU-based coordinating element inside distributed machine architectures. It links servo drives, decentralized I/O, and supervisory networks so that sequential logic, motion profiles, and diagnostic data are executed and exchanged in real time across industrial automation cells.
Computation is handled by a 600 MHz Intel E620T processor, which provides deterministic cycle times for PLC and motion tasks when paired with 512 MB DRAM of onboard memory. The controller accepts a 24 V DC supply and draws up to 36 W, which helps keep cabinet heat and power demand moderate while still supporting two Master/Slave Sercos interfaces for drive communication. A single RJ45 Ethernet port allows programming or higher-level network integration, while one USB host and one USB device connector support HMI panels, service tools, or data logging. Local recipe storage can be expanded through the integrated SD card slot, and three extension-module positions allow additional digital or analog I/O without increasing the CPU footprint. Peak supply current reaches 1.5 A under full load.
Fieldbus expansion relies on the S20 slice I/O system. The internal bus operates at 100 Mbit/s, moving process images quickly to maintain sub-millisecond reaction times. Up to 63 remote S20 modules can be attached, and their cumulative current demand is limited to 2 A from the controller backplane. The unit’s enclosure carries an IP20 rating, so it must be installed inside a switchgear cabinet while still permitting tool-free front wiring. Backplane loading must remain within the stated current limit, and this enclosure type is intended for cabinet installation.
