XM2100.01-01-31-31-301-NN-111N2NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911401266
Ask for AvailabilityThe Bosch Rexroth Indramat XM2100.01-01-31-31-301-NN-111N2NN is part of the XM21 IndraControl Systems series and features an Intel E620T 600 MHz processor with 512 MB DRAM. It offers an Ethernet interface with 1 Gbit/s RJ45, supports up to 3 extension modules, and has onboard Sercos Master (MultiEthernet) fieldbus. The controller has a maximum power draw of 36 W, operates with a 24 V DC supply voltage, and is rated IP20 for protection.
Internal Product Review
The XM2100.01-01-31-31-301-NN-111N2NN is an XM21 IndraControl Systems controller built with an Intel E620T 600 MHz processor and 512 MB DRAM. Integrated Sercos Master MultiEthernet and dual Sercos III ports support efficient motion-network coordination in demanding machine control. IP20 protection and support for up to 63 S20 modules make the platform an excellent choice for scalable cabinet-based automation.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2100.01-01-31-31-301-NN-111N2NN controller is produced by Bosch Rexroth Indramat and belongs to the XM21 IndraControl Systems series. Classified as an embedded PLC, the unit forms the computational core of small-to-medium motion systems, packaging lines, and assembly stations. It hosts modular fieldbus interfaces, allowing a system to combine logic execution, axis synchronization, and diagnostic forwarding in a single DIN-rail footprint. Within an automation hierarchy, it bridges shop-floor actuators and supervisory networks while supporting deterministic reaction times and reduced wiring complexity.
Processing resources are delivered by an Intel E620T 600 MHz CPU, giving deterministic scan times for IEC 61131 application code. Working data are cached in 512 MB DRAM, and this volatile memory supports fast task switching and buffering of protocol stacks. Application files are stored on a removable SD medium of at least 1 GB, and 128 kB of remanent memory preserves production counters during a power outage. External communication to plant Ethernet is handled through a single 1 × RJ45 1 Gbit/s connector, while synchronous drive traffic uses the integrated Sercos Master (MultiEthernet) controller plus two optical Sercos III ports. Three S20 inline bases can dock directly to the right side, and embedded regulators limit consumption to 36 W, which equals a maximum draw of 1.5 A on the low-voltage rail.
The backplane can address up to 63 S20 slices at a sustained channel rate of 100 Mbit/s, and it delivers 2 A of logic power through the internal bus. The electronics operate from a SELV or PELV source at 24 V DC and are protected by an IP20 housing, so the device is intended for use in ventilated control cabinets. Dual USB ports support service access, two Sercos III ports close real-time rings for drives, and onboard monitoring protects SD storage, expansion modules, and power-up behavior.
