XM2100.01-01-31-31-001-NN-105NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911381462
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XM2100.01-01-31-31-001-NN-105NNNN is part of the XM21 IndraControl Systems series. It features an Intel E620T 600 MHz processor, 512 MB DRAM, and a 1 GB SD mass storage. The controller provides one gigabit Ethernet port, two Sercos III ports, and has an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2100.01-01-31-31-001-NN-105NNNN is a compact programmable logic and motion controller produced by Bosch Rexroth Indramat as a member of the XM21 IndraControl Systems series. Designed for cabinet installation, the unit links drives, I/O, and supervisory networks to coordinate machine cycles in real time. Its control software executes PLCopen instructions while exchanging deterministic data over Sercos, making it suitable for packaging, assembly, and material-handling stations that require synchronized axis control and diagnostic feedback. By combining PLC and motion tasks in one housing, it centralizes logic execution, axis coordination, and network communication in a single cabinet-mounted platform.
It relies on a 24 V DC SELV/PELV supply and uses an Intel E620T 600 MHz processor with 512 MB DRAM for dynamic variables and buffering. Communication with higher-level Ethernet networks is provided through 1 × RJ45 1 Gbit, while machine-side motion data travel through 2 × Sercos III Master/Slave interfaces that can operate in either master or slave mode. The enclosure has an IP20 rating, so the controller is intended for dry, nonconductive cabinets. Configuration data reside on a 1 GB SD card, and 128 kB of remanent memory retains selected variables after power loss. A pair of USB connectors, one host and one device, supports service access and data exchange. During operation, the device draws 1.0 A from the supply, allowing it to fit into low-voltage control cabinets without requiring a separate power class.
For local expansion, the controller offers the S20 I/O bus and supports up to 63 modules, with a segment current of 2 A and a deterministic transfer rate of 100 Mbit/s. This arrangement allows digital and analog terminals to be added without a separate backplane and keeps field-level expansion directly tied to the controller platform. The internal architecture dissipates about 24 W of heat as a typical power draw, allowing passive ventilation in standard cabinets. The unit weighs only 0.38 kg, which helps ease DIN-rail installation and limits cabinet load. With no Xfe extension slots available, expansion is limited to the S20 chain rather than internal option modules.
Frequently Asked Questions about XM2100.01-01-31-31-001-NN-105NNNN:
Q: What Ethernet connectivity is available on the XM2100.01-01-31-31-001-NN-105NNNN controller?
A: This model offers a single Ethernet port with an RJ45 connector and 1 Gbit speed.
Q: What processor is used in the XM2100.01-01-31-31-001-NN-105NNNN from Bosch Rexroth Indramat?
A: The XM2100.01-01-31-31-001-NN-105NNNN is built with an Intel E620T processor running at 600 MHz.
Q: How much RAM does the XM2100.01-01-31-31-001-NN-105NNNN have?
A: This unit is equipped with 512 MB of DRAM memory for system operations.
Q: What is the S20 module capacity for the XM2100.01-01-31-31-001-NN-105NNNN controller?
A: It supports up to 63 S20 modules for system expansion and modularity.
Q: What power supply voltage does the XM2100.01-01-31-31-001-NN-105NNNN require?
A: The nominal supply voltage required for operation is 24 V DC SELV/PELV.
