XM2100.01-01-31-31-001-NN-108N3NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911345728
The Bosch Rexroth Indramat XM2100.01-01-31-31-001-NN-108N3NN is part of the XM21 IndraControl Systems series and features an Intel Atom E620 600 MHz CPU. It has a supply voltage of 24 V DC and offers a maximum power consumption of 36 W, with an internal fuse rating of 2.5 A. The unit supports up to 3 extension modules and provides IP20 protection, operating at altitudes up to 4700 meters.
Internal Product Review
The XM2100.01-01-31-31-001-NN-108N3NN from the XM21 IndraControl Systems series is a robust controller featuring an Intel Atom E620 CPU at 600 MHz and a 1 Gbit/s Ethernet port for high-speed communication. With support for up to 3 extension modules and IP20 protection, the unit is well-suited for scalable automation tasks. Reliable operation is further ensured by a 2.5 A internal fuse and diode-based reverse polarity protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XM2100.01-01-31-31-001-NN-108N3NN is an embedded controller produced by Bosch Rexroth Indramat for the XM21 IndraControl Systems series. It combines PLC processing, motion sequencing, and high-speed fieldbus management so that a single DIN-rail unit can coordinate servo drives, safety I/O, and HMI stations in automated packaging or handling equipment. Three rear connectors support up to three extension modules for additional serial, encoder, or digital channels without increasing cabinet depth.
The controller operates from a nominal 24 V DC supply and draws up to 36 W when all interfaces and attached extension carriers are active; average consumption is 24 W during standard logic cycles. Processing resources come from an Intel Atom E620 (600 MHz) CPU that runs real-time IndraLogic firmware while reserving bandwidth for visualization tasks. A built-in Gigabit interface transfers program variables and diagnostic data across plant networks at 1 Gbit/s, while a front-panel fuse rated at 2.5 A limits fault current on the 24 V rail. These capabilities allow the controller to manage logic execution, network communication, and connected automation devices from a compact installation point.
The housing has an IP20 rating for installation in protected electrical enclosures, and the backplane bus supports as many as 63 S20 slice modules for distributed I/O while supplying them with 2 A through the internal feed. Motion commands can be synchronized through the Sercos master port with a minimum cycle time of 250 µs, aligning drive torque loops with controller scan times. The controller can operate at altitudes up to 4700 m and includes diode reverse-polarity protection and 1500 W transient suppression on the supply input. Its mass of 0.7 kg limits the load placed on the mounting rail, while the integrated electrical protection helps shield the supply connection from polarity errors and voltage surges.
