XFE01.1-FB-04 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911173937
The Bosch Rexroth Indramat XFE01.1-FB-04 is a module in the XM21 IndraControl Systems series with PROFINET and EtherNet/IP communication protocols and two RJ45 Ethernet ports. This unit has an IP20 degree of protection, a nominal supply voltage of 24 V DC, and weighs 0.17 kg. It supports a maximum operating temperature of 60°C and provides a maximum power consumption of 4.8 W.
Internal Product Review
The XFE01.1-FB-04 is a communication module in the XM21 IndraControl Systems series, featuring support for PROFINET and EtherNet/IP protocols. It offers robust protection with IP20 rating and reverse polarity protection via diode. This model stands out for its reliable network integration and secure operation in industrial environments.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XFE01.1-FB-04 is a modular component supplied by Bosch Rexroth Indramat within the XM21 IndraControl Systems series. It functions as a network interface, providing PROFINET and EtherNet/IP channels so controllers in an automation cell can exchange cyclic and acyclic data with drives, I/O devices, and supervisory systems. The module provides standardized Ethernet-based communication within industrial automation architectures. Its modular format supports integration into control systems that require communication between field devices and higher-level control equipment.
The module has 2 Ethernet ports with RJ45 connectors that enable line or ring topologies. The board uses a nominal supply of 24 V DC, and its maximum electrical demand at that voltage is 4.8 W, keeping thermal dissipation low in compact cabinets. The supported protocols are PROFINET and EtherNet/IP, allowing the system to use either Real-Time Class A or CIP implicit messaging without additional communication hardware. Enclosure protection is rated at IP20, so the device must be installed inside a cabinet or another suitable enclosure. This protection level prevents access to hazardous internal parts with fingers but does not provide protection against water. The two network connections also allow data to pass between connected industrial devices without requiring a separate external switch for a basic line arrangement.
Circuit protection is provided by an onboard 4 A fuse that disconnects the supply if an internal fault causes current to exceed its rating. Galvanic separation between terminals Xf40 and Xf41 withstands 1200 V DC for 1 minute, helping isolate the Ethernet layer from input transients. During continuous operation, the electronics draw only 0.2 A from the 24 V bus, which is compatible with common PLC power supplies. The housing weighs 0.17 kg, allowing DIN-rail installation without additional mechanical support. The permitted operating temperature ranges from -25 to 60 °C, while the maximum relative humidity is 95% without condensation. The module is intended for contamination level 2 and overvoltage category 2 conditions. Adequate cabinet ventilation and appropriate spacing should be maintained so the unit remains within its permitted temperature range during operation.
