XCS2-W0180ABN-02NETM5NNNN-S03RSN2NNNN5NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914507560
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XCS2-W0180ABN-02NETM5NNNN-S03RSN2NNNN5NN is a single-axis converter from the XCS Single Axis CtrlX Converters series. It uses Multi-Ethernet communication and ctrlX DRIVEplus hardware, with a maximum current of 180 Amps and input voltage range of 3-phase AC 200 to 500 Volts. The converter is cooled by internal air, features SafeMotion (M5) safety function, and has IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0180ABN-02NETM5NNNN-S03RSN2NNNN5NN is a single-axis converter manufactured by Bosch Rexroth Indramat for the XCS Single Axis CtrlX Converters series. As a Generation 2 ctrlX DRIVE unit, it connects a machine’s power section to motion controllers and industrial networks. The converter supplies regulated voltage and current to synchronous or induction motors used in automated cells, packaging lines, and material-handling systems. Its single-axis design allows it to control the torque, speed, and position of one connected motor within a coordinated automation platform.
The converter communicates with higher-level controllers through a Multi-Ethernet interface that supports multiple industrial protocols without requiring additional communication hardware. Drive intelligence is provided by the ctrlX DRIVEplus control board, which runs the application layers needed for velocity, position, and torque control. The housing has an IP20 rating, so the unit must be installed inside a cabinet that protects it from dust and direct contact. The mains connection accepts three-phase AC from 200 to 500 V, +10%/-15%, accommodating a broad range of factory power systems. The power stage delivers up to 180 A of phase current for medium-to-large servo motors that require high dynamic torque. An integrated braking transistor directs regenerated energy to an external resistor during rapid deceleration or vertical-axis overrun conditions.
Thermal management relies on internal air cooling, so the cabinet ventilation system must remove waste heat from the converter and maintain adequate airflow around the housing. Real-time motion commands are exchanged through EtherCAT with Servo Drive Profile over EtherCAT, supporting synchronized multi-axis updates with efficient telegram handling. The integrated safety layer provides SafeMotion M5 functions, including safely limited position monitoring that remains available when the primary control loop is inhibited. These safety functions operate within the DRIVE Runtime environment and support motion supervision directly in the converter. The unit does not require an export license because its output frequency remains below 599 Hz.
