XCS2-W0120ABN-01NETT0ECNN-S03RSN1NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914504290
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XCS2-W0120ABN-01NETT0ECNN-S03RSN1NNNN0NN is part of the XCS Single Axis CtrlX Converters series and features ctrlX DRIVE control hardware. This single-axis converter has a maximum current of 120 Amps, operates on 3-phase AC input voltage from 200 to 500 V, and offers Multi-Ethernet communication. It includes an internal air cooling method and is rated IP20 for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0120ABN-01NETT0ECNN-S03RSN1NNNN0NN is a single-axis converter from the XCS Single Axis ctrlX Converters series produced by Bosch Rexroth Indramat. As a Generation 2 ctrlX DRIVE unit, it provides closed-loop motor control for one axis and can be installed alongside other drive modules in a multi-axis system. The device connects motion tasks to higher-level controllers through its communication interface and converts three-phase mains power into regulated output for servo or induction motors used in material handling, packaging, and general factory automation.
The power section accepts a supply of three-phase AC 200 to 500 V, +10%/-15% and delivers up to 120 A of continuous current. An internal heat sink uses internal air cooling to remove heat generated during operation. The IP20 housing protects against accidental contact with hazardous internal components, so the converter must be installed inside a suitable switchgear cabinet. Network traffic is handled through a Multi-Ethernet interface that supports Sercos, EtherNet/IP, PROFINET, and other industrial communication protocols without additional plug-in cards. The ctrlX DRIVE control hardware processes motor feedback through the built-in multi-encoder interface. A braking transistor in the power section redirects excess regenerative energy to an external resistor during rapid deceleration. No motor connector set is supplied, and the converter does not include an operating panel.
Drive functions are managed by the DRIVE Runtime environment, which provides the control services needed for coordinated motor operation. The Sercos III interface supports deterministic communication with compatible motion controllers and other networked drive components. SafeMotion hardware option 1 provides the certified Safe Torque Off (STO) function, which prevents the drive from producing motor torque when the safety function is active. The unit uses controller stack Version 03 for the XCS2 platform and does not include technology apps. Its maximum output frequency remains below 599 Hz, so the unit does not require an export license based on output frequency. Configuration, diagnostics, and drive parameter management are performed through the ctrlX DRIVE software tools.
