XCS2-W0070ARN-01AETT0ECNN-S05RSN4NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914511188
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XCS2-W0070ARN-01AETT0ECNN-S05RSN4NNNN0NN is part of the XCS Single Axis CtrlX Converters series, featuring ctrlX DRIVE control hardware and Multi-Ethernet communication. It provides a maximum current of 70 Amps, operates with an input voltage range of 3 x AC 200 to 500 Volts, and has an IP20 protection rating. The converter is equipped with a multi-encoder interface, integrated braking transistor and resistor, and includes the Safe Torque Off safety function.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0070ARN-01AETT0ECNN-S05RSN4NNNN0NN is a Generation 2 single-axis converter in the XCS Single Axis ctrlX Converters series from Bosch Rexroth Indramat. It belongs to the ctrlX DRIVE platform and serves as the power and control interface between a three-phase line supply and a servo or induction motor. Within automated equipment, the converter translates PLC commands into regulated motor current and motion. This functionality allows one axis to start, stop, accelerate, or move to a commanded position with repeatable accuracy.
The converter accepts a line supply of 3 × AC 200–500 V (+10/-15%) and can deliver up to 70 A of phase current for midrange actuators. Heat is removed through internal air cooling, so the cabinet must provide adequate airflow around the unit. The housing has an IP20 protection rating and is intended for installation inside a suitable control cabinet. Control tasks run on the ctrlX DRIVE hardware with the Standard runtime and DRIVE Runtime functional scope. The installed software release is Version 05. A front panel provides local access for parameter entry and operating checks. The second option position contains a multi-encoder interface, allowing the controller to process compatible motor and position feedback signals. SafeMotion hardware is installed as the first option, while the motor connector set must be obtained separately.
Field communication is provided through Multi-Ethernet networking, which supports integration with compatible industrial control systems. The built-in PROFINET IO protocol is activated at the factory for cyclic command, status, and diagnostic data exchange. Other supported Ethernet protocols can be activated when required by the control architecture. During rapid deceleration, an integrated braking transistor and braking resistor manage regenerated energy from the motor and dissipate it as heat. The braking circuit reduces excessive voltage buildup on the DC bus when a connected load returns energy to the converter. Machine safety includes Safe Torque Off (STO), which prevents torque-producing motor current when the safety circuit opens. The converter operates with an output frequency below 599 Hz and does not require an export license based on this frequency limit.
