XCS2-W0070ARN-01AETT0ECNN-S04RSN2NNNP0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914508582
The Bosch Rexroth Indramat XCS2-W0070ARN-01AETT0ECNN-S04RSN2NNNP0NN is a single-axis converter from the XCS Single Axis CtrlX Converters series. It operates with an input voltage range of 3 x AC 200 to 500 V and has a maximum current rating of 70 Amps. The device features an IP20 degree of protection, air cooling, and includes Multi-Ethernet communication with an integrated braking transistor and braking resistor.
Internal Product Review
The XCS2-W0070ARN-01AETT0ECNN-S04RSN2NNNP0NN is a ctrlX DRIVE single-axis converter configured for Multi-Ethernet communication and EtherCAT (SoE) integration. Internal air cooling and IP20 protection support clean cabinet installation and dependable operation in automated machinery. A 70 A maximum current rating paired with Safe Torque Off (STO) makes the converter a strong fit for performance-focused motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0070ARN-01AETT0ECNN-S04RSN2NNNP0NN is a Generation 2 single-axis converter in the Bosch Rexroth Indramat XCS Single Axis ctrlX Converters series. Working as the power stage for a servo or induction motor, it conditions incoming three-phase power and controls the current, voltage, and braking energy through the ctrlX DRIVE hardware. The unit fits inside a control cabinet and provides a compact means of regulating motion in packaging, material-handling, and general automation systems. Its single-axis design allows it to operate one connected motor through closed-loop torque, speed, or position control.
The converter accepts three-phase 200–500 V AC (+10/-15%) and can deliver up to 70 A to the motor windings. Thermal management relies on internal air cooling, so cabinet airflow removes heat from the converter during operation. The IP20 enclosure protects against accidental contact with internal components and is intended for installation in a clean, closed panel. The integrated power section contains a braking transistor and resistor that convert excess kinetic energy into heat without requiring separate braking hardware. Communication with PLCs and higher-level motion controllers is handled through a Multi-Ethernet interface, allowing the converter to connect to supported industrial networks. A factory-mounted operating panel provides local access to parameters and status information. The unit is supplied without a motor connector set, allowing the appropriate cable and connector arrangement to be selected for the connected motor and cabinet layout.
Functional safety is provided by the STO circuit in Hardware Option 1 SafeMotion, which shuts down torque production when the safety function is activated. Command and diagnostic traffic runs through the EtherCAT (SoE) channel, supporting cyclic communication with the motion controller. Feedback devices connect through the Hardware Option 2 multi-encoder interface, which accommodates compatible motor feedback systems for closed-loop operation. The maximum output frequency remains below 599 Hz. The standard DRIVE Runtime Productivity environment supports the converter’s control functions, while the installed operating panel provides direct access to drive information. Hardware Option 3 is not installed, and the unit does not include an additional technology function application.
