XCS2-W0054ARN-02AETT0ECNN-S04RSN1NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914512494
The Bosch Rexroth Indramat XCS2-W0054ARN-02AETT0ECNN-S04RSN1NNNN0NN is part of the XCS Single Axis CtrlX Converters series and features ctrlX DRIVEplus control hardware. It supports Multi-Ethernet communication, works with input voltages from 3 x AC 200 to 500 V, and includes Safe Torque Off for safety. The converter offers a maximum current of 54 Amps, an integrated braking transistor and resistor, and uses internal air cooling with an IP20 protection rating.
Internal Product Review
The XCS2-W0054ARN-02AETT0ECNN-S04RSN1NNNN0NN is a Generation 2 ctrlX DRIVE single-axis converter from Bosch Rexroth Indramat. Multi-Ethernet communication and Sercos III protocol support make integration into advanced motion networks especially appealing from a controls standpoint. A 3 x AC 200 to 500 V input range and Safe Torque Off capability make the converter a strong choice for modern, safety-conscious drive systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0054ARN-02AETT0ECNN-S04RSN1NNNN0NN is a Generation 2 single-axis converter manufactured by Bosch Rexroth Indramat for the XCS Single Axis ctrlX Converters series. It converts three-phase mains power into controlled motor output for positioning, conveying, and process drives, allowing programmable motion control to replace conventional contactor starters. Real-time data exchange over industrial Ethernet supports close coordination with PLCs and CNCs, while modular option slots accommodate safety, feedback, and panel functions without requiring changes to the cabinet layout.
Beneath the front panel, the power stage accepts 3 × AC 200 to 500 V, +10%/-15% and delivers up to 54 A of continuous output for medium-power servo axes. The control electronics use the ctrlX DRIVEplus platform, providing a footprint that is consistent with other ctrlX modules. A Multi-Ethernet port provides selectable fieldbus support without requiring add-on cards. The converter uses internal-fan air cooling to remove heat from the power electronics during operation. Its housing has an IP20 rating, so the unit must be installed inside a suitable control cabinet. The converter is supplied without a motor connector set. DRIVE Runtime is preinstalled, and the unit operates without an enabled technology app.
Axis communication is handled by Sercos III, which operates through the same Ethernet hardware used by the converter. SafeMotion option 1 is installed, and the certified Safe Torque Off (STO) channel disables the inverter gate signals when a safety stop is requested. This function prevents the power stage from generating motor torque while the safety condition remains active. The power stack includes an integrated braking transistor and braking resistor; the transistor routes regenerated energy to the resistor during deceleration. The standard runtime environment operates below the 599 Hz export threshold and does not require an additional license. A multi-encoder interface supports compatible motor feedback devices. A local panel is mounted on the converter for direct access to operating information and basic controls.
