Product Description:

The XCS2-W0054ARN-02AETM8ECEC-S05RSN3TE1P5NN is a single-axis converter produced by Bosch Rexroth Indramat for the XCS Single Axis CtrlX Converters series. As a Generation 2 ctrlX DRIVE unit, it combines power electronics and motion control in one enclosure to regulate induction or servo motors used in industrial automation lines. The converter links directly to the ctrlX DRIVE platform, supplying closed-loop speed and torque control while supporting safe motion functions for axes that require certified position monitoring during normal operation and emergency stops.

The power section accepts a three-phase supply of 200 to 500 V AC with +10/-15% tolerance and can deliver up to 54 A of continuous output current to the connected motor. Protection against finger contact and falling dirt is provided by the IP20 rating. Thermal management is handled by internal air cooling, which channels cabinet air through the heat sink without external ducting. Network access is flexible because the base hardware carries Multi-Ethernet ports, while axis control and diagnostics are exchanged in real time over EtherCAT (CoE). Command execution runs on the ctrlX DRIVE firmware, allowing parameter changes to propagate without separate gateway hardware.

Dynamic braking energy is absorbed by an integrated braking transistor and braking resistor, so no external resistor bank is necessary for moderate deceleration cycles. Functional safety is embedded through the SafeMotion (M8) option, which enables the SafeMotion Position scope and allows certified position-based shutdowns through the multi-encoder interface. Core processing runs on ctrlX DRIVEplus hardware with Version 05, and the installed runtime supports DRIVE Runtime Productivity and the XCS2 Technology Function App for uploading or programming user applications. A front panel is installed, while the absence of a motor connector set allows machine builders to select cable kits suited to the installation.