Product Description:

The XCS2-W0054ARN-01NETT0NNNN-S04RSN1NNNN0NN is a Generation 2 single-axis converter in the XCS Single Axis ctrlX Converters series produced by Bosch Rexroth Indramat. As part of an automation drive train, the unit converts three-phase mains power into regulated voltage and current for a connected servo or induction motor. This conversion enables precise speed and torque control for one machine axis in applications such as material handling, packaging, and automated assembly. Its compact format supports installation in control cabinets where several drive components must share limited mounting space. The converter also integrates directly into modular motion systems without requiring a separate power stage for the controlled axis.

The converter accepts a three-phase AC supply of 200 to 500 V with a tolerance of +10% to -15%, allowing operation on a broad range of industrial power systems. Its power section can deliver up to 54 A to the motor terminals for sustained motion and acceleration demands. An internal fan moves air through the unit to remove heat from the power electronics during operation. The housing carries an IP20 rating, so the converter must be installed inside a protective enclosure that prevents contact with internal components. A factory-installed integrated braking transistor controls the transfer of regenerative energy to a compatible braking resistor during dynamic deceleration. Command and diagnostic data are exchanged through Multi-Ethernet interfaces, allowing connection to supported industrial Ethernet networks. Real-time motion communication is handled through Sercos III for synchronized command execution and cyclic drive data exchange.

The converter runs the DRIVE Runtime package in a Standard runtime environment and uses software release Version 04. Core motor-control processing and safety logic operate on the embedded ctrlX DRIVE electronics, keeping these functions within the converter rather than requiring a separate controller module. Hardware Option 1 provides Safe Torque Off, which prevents the power stage from producing motor torque when the safety function is activated. This function supports controlled machine shutdown circuits, although external safety components may still be required by the installation. The maximum output frequency remains below 599 Hz, placing the unit within the stated frequency range for this configuration. The converter is supplied without a front panel or motor connector set, so the required installation accessories must be selected for the connected motor and cabinet layout.