XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914513115
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN, part of the XCS Single Axis CtrlX Converters series, has a mass of 5.8 kg. It features output voltages ranging from AC 0 to 500 V and DC 280 to 710 V, with a mains frequency of 50 to 60 Hz. The device supports a short circuit current rating of 42000 A rms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN is a CE certified and UL listed converter unit designed by Bosch Rexroth Indramat as part of its effort to improve industrial processes through accurate motion and motion control systems. This converter unit is built with the operator in mind, it is relatively easy to install, and it does not produce extreme noise levels while it is in use. The use of this product is restricted to industrial environments; its operation can not be supported by the public low-voltage system common to residential areas. Also, the surrounding temperature around the amplifier should be maintained between 0 to about 40 degrees Celsius. The components of this product unit are classified as category three products as defined in IEC 61800-3. Operators are required to use interference suppression components like mains filter to ensure that the motor complies with this particular product category.
The XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN connector requires two main categories of connectors for operation, including the power connector and the motor feedback connector. The electrical cables necessary for the wiring of these connectors are not delivered with the converter; these cables have to be ordered separately. Environments where this product is to be used must be free of dirt, corrosive gasses and dust. Also, there is a need to ensure the converter is installed in a control cabinet that can provide protection that meets at least IP54 and is properly grounded.
The XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN converter is able to withstand relative humidity level that falls between 5 to about 95 per cent, absolute humidity levels should also be kept below 29 gram per cubic meter. Moisture condensation around this product during its operation is not allowed; pollution degree should also be maintained at degree 2. The vibration resistance level of this product during operation is about 3 millimeters.
Frequently Asked Questions about XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN:
Q: What type of encoder is compatible with this product?
A: The XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN features a multi-encoder interface that is compatible to a wide range of encoder designs.
Q: Is the XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN equipped with a panel?
A: Yes. A panel is integrated into this converter unit.
Q: Can the XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN be delivered to customers outside the United States?
A: Yes. Wake Industrial guarantees worldwide installation through FedEx, DHL or UPS.
Q: How many times should maintenance operation be carried out on the XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN every year?
A: The XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN is a maintenance free device.
Q: What is the peak installation height for the XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN?
A: The maximum installation height for the XCS2-W0054ARN-01AETT0ECNN-S05RSN3NNNN0NN without derating is about 1000 meters above sea level.
