XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914508460
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN converter weighs 5.8 kilograms, has a device depth of 196.5 mm, an output voltage range of AC 0 to 500 and DC 280 to 710, and a maximum DC bus power of 41.2 kW. Part of the XCS Single Axis CtrlX Converters series by Bosch Rexroth Indramat, it features a mains frequency of 50 to 60 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN is a drive controller made by Bosch Rexroth Indramat. It regulates the frequency at which voltage and current are supplied to an attached motor, ensuring precise control of its movement. For optimal performance, the drive controller requires a current input of 26.6 amperes and a voltage input of 115 volts. These electrical signals must be delivered at a frequency of 50 to 60 Hertz. When these conditions are met, the drive controller regulates the attached motor, supplying it with an alternating current between 0 and 500 volts and a direct current as defined in the configuration instructions.
TheXCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN drive controller is able to easily handle regenerated energy produced during motor deceleration. This is due to the integrated brake transistor it features. It has an internal air cooling system that regulates its temperature during operation. despite being inside a control cabinet. This air cooling system helps prevent overheating by efficiently dissipating heat without the need for a cold plate. For effective ventilation and flow of air in and out of the converter, a clearance of at least 80 millimeters should be allowed above and below the converter during installation. Maintaining a clean and well-ventilated control cabinet ensures optimal cooling performance and extends the lifespan of the drive controller.
The XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN has an IP protection rating of 20, meaning it is protected against solid objects larger than 12.5 millimeters but is not resistant to water. It must be operated in an environment with temperatures ranging from 0 to degrees Celsius. Exceeding 40 degree Celsius increases the risk of overheating, which could affect performance and longevity. The operating environment of this drive controller must maintain a relative humidity of 5 to 90 percent. Within this range, the risk of moisture buildup is minimized, reducing the chance of short circuits or component damage.
Frequently Asked Questions about XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN:
Q: What is the recommended installation height for best performance standards from this converter?
A: For best performance, this converter should be installed and used at an height that does not exceed 1000 meters above sea level.
Q: Is the operation of this converter affected by humidity?
A: Yes. The permissible relative humidity levels around the converter should be between 5 to 95 percent. Water condensation should also be avoided.
Q: What is the allowed pollution degree around this converter during operation?
A: The permissible pollution degree for this product should is pollution degree 2 according to IEC 60721-3-3.
Q: Can the XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN withstand extreme vibration?
A: This converter belong to the 3M4 vibration/shock category.
Q: What is the overvoltage category of this converter?
A: The XCS2-W0054ARN-01AETT0ECNN-S04RSN2NNNP0NN belongs to the Overvoltage category III
