XCS2-W0054ARN-01AETT0ECNN-S04RSN1NNNP0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914512764
The Bosch Rexroth Indramat XCS2-W0054ARN-01AETT0ECNN-S04RSN1NNNP0NN is part of the XCS Single Axis CtrlX Converters series and operates with a maximum current of 54 Amps on 3-phase AC input from 200 to 500 Volts. This single-axis converter features ctrlX DRIVE hardware, internal air cooling, and an IP20 protection rating. It includes multi-Ethernet communication, a multi-encoder interface, and Safe Torque Off safety function.
Internal Product Review
The XCS2-W0054ARN-01AETT0ECNN-S04RSN1NNNP0NN is a ctrlX DRIVE single-axis converter with internal air cooling and an integrated braking transistor/braking resistor. Multi-Ethernet communication and Sercos III protocol support simplify integration in advanced motion control architectures. Safe Torque Off and IP20 protection make this unit a strong choice for dependable industrial drive service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0054ARN-01AETT0ECNN-S04RSN1NNNP0NN is a Generation 2 single-axis converter produced by Bosch Rexroth Indramat for the XCS Single Axis CtrlX Converters series. As part of the ctrlX DRIVE platform, the unit conditions three-phase mains power and regulates motor current so a motion controller can assign torque, speed, or position commands to one axis within an automated cell. Its compact housing and internal panel layout allow the converter to be installed directly beside matching supply modules. This arrangement creates a modular drive stack for packaging, material-handling, and machine-tool applications while conserving space inside the electrical enclosure.
The power stage accepts a three-phase AC input from 200 to 500 V with a tolerance of +10% to -15%, allowing the same unit to operate on global low- and medium-voltage networks without tap changes. During acceleration, the converter can deliver up to 54 A of phase current for mid-frame synchronous or induction motors used on feed axes and gantries. The Multi-Ethernet interface supports several industrial communication protocols, simplifying network integration and reducing the need for separate communication hardware. Its IP20 housing is intended for installation inside a closed electrical enclosure. Finger-safe ventilation slots support heat dissipation while providing protection against accidental contact with internal components.
The device provides a Sercos III fieldbus port for deterministic motion commands alongside its general Ethernet connection. Dynamic braking energy is absorbed by an integrated braking transistor and braking resistor, removing the need for a separate braking unit when operating moderate-inertia loads. The certified Safe Torque Off (STO) circuit disables torque-producing power when a monitored safety input opens. This function allows the connected motor to stop producing torque without requiring the converter’s main power supply to be disconnected. Thermal regulation relies on internal air cooling, which directs cabinet air across the power modules and heat-dissipating surfaces. Adequate enclosure airflow and installation clearances are therefore required to prevent excessive heat buildup during sustained operation.
