XCS2-W0054ARN-01AETT0ECNN-S03RSN4NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914505728
The Bosch Rexroth Indramat XCS2-W0054ARN-01AETT0ECNN-S03RSN4NNNN0NN is part of the XCS Single Axis CtrlX Converters series and features ctrlX DRIVE control hardware. It supports Multi-Ethernet communication, offers IP20 degree of protection, and has an internal air cooling method. The converter operates at input voltages from 3 x AC 200 to 500 V and provides a maximum current of 54 Amps, with a built-in Safe Torque Off safety function.
Internal Product Review
The XCS2-W0054ARN-01AETT0ECNN-S03RSN4NNNN0NN is a single-axis ctrlX converter with Multi-Ethernet communication. A 3 x AC 200 to 500 V input range and 54 A maximum current give the unit strong flexibility for demanding axis applications. IP20 protection and Safe Torque Off support make this converter a very capable choice for modern control cabinets.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0054ARN-01AETT0ECNN-S03RSN4NNNN0NN is a Generation 2 single-axis converter built by Bosch Rexroth Indramat for the XCS Single Axis ctrlX Converters series. As part of the ctrlX DRIVE platform, it conditions three-phase mains power and supplies regulated output to a compatible servo or induction motor. In automation cells, the unit acts as the power interface between motion controllers and machinery, enabling speed, position, and torque control on one mechanical axis. Integrated fieldbus communication allows the converter to coordinate its operation with other drives in a multi-axis system.
The converter uses ctrlX DRIVE control hardware, providing a consistent parameter structure and diagnostic environment across the platform. Network access is provided by the Multi-Ethernet interface, which permits protocol selection without requiring a different option card. The converter accepts a line supply of 3 × AC 200–500 V, +10%/-15% and can deliver up to 54 A of motor current. Heat is removed by internal air cooling, allowing the power electronics to operate within their permitted temperature range. The housing has an IP20 protection rating, so the converter must be installed inside a closed control cabinet that prevents unintended contact and exposure to contaminants. A multi-encoder interface installed as hardware option 2 supports EnDat, BiSS, and other feedback formats. A factory-installed panel provides local access for setup, status monitoring, and diagnostic tasks.
Dynamic braking is supported by an integrated braking transistor and braking resistor housed in the power section, allowing regenerated energy to be dissipated during motor deceleration. Functional safety includes Safe Torque Off (STO), which prevents torque-producing motor current when the safety function is activated. Hardware option 1 adds the SafeMotion package for monitored motion functions without requiring separate drive-side safety hardware. Real-time communication with higher-level PLCs is handled through PROFINET IO, selected as the active protocol for the Multi-Ethernet connection. The converter operates with DRIVE Runtime in the standard environment and corresponds to Version 03 of the XCS2 platform. Hardware option 3 is not installed, and no technology function application is loaded. The converter is supplied without a motor connector set, so the required connection components must be selected separately for the intended motor and cable arrangement.
