XCS2-W0023ARN-01AETT0NNNN-S05RSN2NNNN0NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R914512357
The Bosch Rexroth Indramat XCS2-W0023ARN-01AETT0NNNN-S05RSN2NNNN0NN is a single-axis converter in the XCS Single Axis ctrlX Converters series. This Generation 2 ctrlX DRIVE features Multi-Ethernet communication, an input voltage range of 3 x AC 200 to 500 V, and a maximum current of 23 Amps. It includes an integrated braking transistor and resistor, offers Safe Torque Off (STO) safety function, and has IP20 degree of protection.
Internal Product Review
The XCS2-W0023ARN-01AETT0NNNN-S05RSN2NNNN0NN is a Generation 2 ctrlX DRIVE single-axis converter from Bosch Rexroth Indramat. Multi-Ethernet communication and EtherCAT (SoE) support give the converter strong integration value in advanced motion architectures. A 3 x AC 200 to 500 V input range with Safe Torque Off (STO) makes this model a capable and safety-focused drive solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The XCS2-W0023ARN-01AETT0NNNN-S05RSN2NNNN0NN is a single-axis converter produced by Bosch Rexroth Indramat within the XCS Single Axis ctrlX Converters series. As a Generation 2 ctrlX DRIVE power module, it connects the supply network to a compatible servo or induction motor. The converter supplies regulated three-phase energy so automated equipment can control motor speed, position, and torque with cycle-to-cycle consistency. Its single-axis design combines the power stage and embedded control functions in a compact unit intended for installation inside an industrial control cabinet.
The device accepts a supply of 3 × AC 200 to 500 V (+10%/-15%) and can deliver up to 23 A through the motor terminals. Its Multi-Ethernet interface supports PROFINET, EtherNet/IP, and other compatible industrial networks through shared communication hardware. A dedicated EtherCAT interface using Servo Drive Profile over EtherCAT supports rapid cyclic data exchange with the machine controller. The IP20-rated enclosure protects against accidental contact with hazardous internal parts and requires installation within a suitable cabinet. Functional safety is provided by Safe Torque Off (STO), which disables the gate-drive signals to the power transistors when the corresponding safety input is activated. SafeMotion functions are also available through the first installed hardware option, allowing supported motion-safety tasks to run within the drive platform.
Thermal management uses internal air cooling to move cabinet air across the heat sink and remove heat from the power electronics. Adequate cabinet ventilation and clearance around the air passages are necessary to maintain proper airflow during continuous operation. An integrated braking transistor and braking resistor absorb regenerated energy when the connected motor decelerates, reducing voltage rise in the DC bus. Parameters and operating information are accessible through a front-mounted operator panel, which provides local access to common drive settings and status data. The embedded ctrlX DRIVE control platform runs the DRIVE Runtime functional scope and coordinates motor regulation, safety processing, and network communication. The output terminals are supplied without a motor connector set, allowing the connection hardware to be selected for the cable and motor used in the application.
