XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911413159
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN is a compact single-axis converter with a device width of 50 mm and a rated input voltage of 3 x AC 200Y/115V to 500Y/289V. Manufactured by Bosch Rexroth Indramat as part of their XCS Single Axis CtrlX Converters, it offers a maximum DC bus power of 31.8 kW and short circuit rating of 42000 A rms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN is an industrial AC drive. It is produced by Bosch Rexroth for single-axis control. The generation 2 drive is based on a feeding converter. It is designed for air cooling and uses is internal air for heat dissipation. Drives from the ctrlX series are available with different output current ratings. This drive has a maximum output current of 23 Amps. Housing of the drive unit complies with IP20 requirements, which means that it is not safe from dust or liquids. Therefore, it must be used indoors or when mounted inside a cabinet that provides adequate protection from the elements. XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN is an AC drive designed for three-phase AC input at 500 Volts AC with 10% allowed tolerance. Its power section includes accessories that include a braking transistor and a braking resistor.
The drive includes a panel. The integration communication interface supports Multi-Ethernet. Bosch has designed this series of drives with a modular design with three slots for hardware options modules. The first slot on the drive is fitted with a safe torque off module. The second and third slots are vacant. Operators can install different modules in these slots, including a multi-encoder interfaces and Multi-Ethernet modules. The runtime type, version and release on the XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN are standard, version 03, and the current release. An export license is not required and the output frequency is limited to less than 599 Hertz. The drive is designed to support SERCOS III communication protocol. For safe operation the power cables used with the drive should be AWG 14 or larger. Use of thinner cables can lead to operational and safety issues. Only qualified personnel should handle the drive.
Frequently Asked Questions about XCS2-W0023ARN-01AETT0NNNN-S03RSN1NNNP0NN:
Q: What is the drive protection rating?
A: The protection rating is IP20.
Q: Does the drive include a panel?
A: A panel is available on the drive.
Q: Which accessories are included on the power section?
A: A braking transistor and braking resistor are available.
Q: Does the drive require export license?
A: An export license is not required.
Q: What is the recommended wire size?
A: AWG 14 cables are recommended.
