Product Description

The VT 16000-2X-131-A servo amplifier produced by Bosch Rexroth has a three-phase output. This amplifier incorporates surface mount technology. The product is CE Certified. The device increases the control capabilities possible over the default PID closed loop. The unit has two output current ratings of +/-60mA and +/-100mA. It does not implement any special over-speed protection mechanism. The amplifier must have a minimum distance from the ground plate with the shield connection. The product drives servomotors in critical speed and position control applications. This device has an overly high temperature if its connector has a broken pin. The unit is easy to set up and use.

The amplifier controls the positioning, torque and rotational speed of servomotors deployed in automated facilities and robots. The product requires minimal maintenance when it is utilized in harsh environments. The device is capable of controlling the voltage across the servomotor to trigger a current in its windings. The unit uses a closed loop control to adjust the current and/or voltage of the related servomotor. It offers the desired performance and precision for several applications. This product portrays an ammeter connection on its face plate to measure the current of the servo valve. This VT 16000-2X-131-A amplifier is associated with one-year backup support.

The device receives a control signal as input from a motion controller. The unit uses LEDs on the front panel for its diagnosis. It is necessary to take off all electric connections and have a single-phase voltage applied to its terminals for about half a minute with a storage period of over one year. The amplifier nameplate has all the technical details required when a replacement or service is needed. The product must adhere to the connection requirements mentioned in its documentation. This amplifier is sent to its destination at any address of your preference.