VT 16000-2X-151 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900566773
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT 16000-2X-151 is a servo amplifier card from the VT 1600 Servo Amplifiers series, designed for use with 2FRE 10 and 2FRE 16 valves. It measures 100 by 160 mm and has a 32-pin blade connection per DIN EN 60603-2 form D. This card operates at 24 VDC with power consumption under 35 W and weighs 0.15 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 16000-2X-151 servo amplifier card is manufactured by Bosch Rexroth Indramat and belongs to the VT 1600 Servo Amplifiers series. It conditions command voltages and drives hydraulic solenoids so proportional valves track reference signals in industrial automation. The unit is tailored for 2FRE 10 and 2FRE 16 valves, giving machine builders an interchangeable plug-in option for closed-loop flow or pressure control. This arrangement lets the control card support stable valve response in systems where smooth hydraulic regulation is required.
Electrically, the card operates from a nominal supply of 24 VDC that may vary between the 22 V lower and 35 V upper limits. Internal regulation produces ±9 V ±1% rails for signal processing. Total draw stays below <1.5 A, translating to an overall dissipation of <35 W. The onboard oscillator runs at 2.5 kHz ±10%, generating the pulse-width-modulated output that is filtered to produce a steady coil current. At full command, the stage delivers 2.2 A ±10% into a 10 Ω solenoid, so magnetic force remains linear to the setpoint even when line voltage shifts. A time-lag fuse rated at 2.5 A protects the supply input from fault currents. This control method helps reduce output ripple and supports repeatable valve movement during changing load conditions.
Mechanical dimensions follow the Euro-card standard. The board area measures 100 × 160 mm, while the 128.4 mm front plate holds the potentiometers and test pins. Component soldering depth is limited by a 5.08 mm solder-side width, allowing dense stacking in card cages. Installation uses a 32-pin blade connector complying with DIN EN 60603-2 form D, and this header also carries the ±9 V reference and feedback signals. Maintenance is simplified by a glass-tube fuse of 2.5 A T that can be changed from the front without removing the card. The assembly weighs only 0.15 kg, minimizing load on the rack guides while still providing enough thermal mass to stabilize temperature during continuous duty. Front-access adjustment points also make routine signal checks easier when the card remains installed in the rack.
Frequently Asked Questions about VT 16000-2X-151:
Q: Which valves are compatible with the VT 16000-2X-151 servo amplifier?
A: The VT 16000-2X-151 is designed for 2FRE 10 and 2FRE 16 valve compatibility.
Q: What type of connection does the VT 16000-2X-151 feature?
A: This servo amplifier uses a 32-pin blade connection in DIN EN 60603-2 form D.
Q: What is the operating voltage specified for the VT 16000-2X-151?
A: The amplifier has an operating voltage of 24 VDC with a tolerance of +40% and -5%.
Q: How much power does the VT 16000-2X-151 typically consume?
A: Power consumption for this model is less than 35 W during operation.
Q: What is the solenoid current rating for the VT 16000-2X-151 amplifier?
A: The maximum solenoid current for the VT 16000-2X-151 is 2.2 A with a 10% tolerance.
