VT 16000-2X-150-A Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900929194
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT 16000-2X-150-A is part of the VT 1600 Servo Amplifiers series and uses a 3U board format with DIN 41612 32-pole connectors. It provides a maximum output current of ±60 milliamps and has a dither frequency of 340 Hz. This amplifier has a mass of 0.15 kilograms and a relay switch time of 1 millisecond.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT 16000-2X-150-A is a plug-in servo amplifier card from Bosch Rexroth Indramat belonging to the VT 1600 Servo Amplifiers series. Installed in 19-inch control racks, the card supplies controlled current to proportional solenoids so hydraulic or pneumatic actuators can be positioned with repeatable accuracy in automated machinery.
The card occupies a 3U slice of a Eurocard frame and uses the standard rack width of 8 HP while the component side spans 7 TE and the PCB back edge only 1 TE, allowing tight packing with neighboring modules. Overall height is 172 mm, front-panel width is 40.3 mm, and depth reaches 186 mm from the card edge connector to the knob, so cabinet layout can be planned precisely. Despite its steel front plate the unit weighs just 0.15 kg, easing assembly on hinged frames. Output stages deliver a maximum trimmed current of ±60 mA for direct drive of proportional valve coils, and a constant dither current of 3 mApp minimizes static friction in the actuator. Power and signal lines pass through a Form C, 32-pole plug that follows the DIN 41612 pattern for compatibility with standard backplanes.
Dynamic control is aided by a factory-set dither frequency of 340 Hz, while the onboard relay changes state within 1 ms to reduce valve dead time during enable cycles. The power stage is matched to coils that exhibit 2000 Ω resistance, so loop gain remains stable over temperature. Field wiring is routed through the DIN 41612 connector, which is keyed to prevent reversal and is emphasized here as DIN 41612. Rack mechanics follow the 7 TE front width guideline, and the rear guide rails match the 8 HP pitch to align with airflow spaces. Combined, these features let the amplifier deliver repeatable proportional control without additional spacer cards or special cabling.
Frequently Asked Questions about VT 16000-2X-150-A:
Q: What is the maximum output current of the VT 16000-2X-150-A amplifier?
A: The VT 16000-2X-150-A servo amplifier provides a maximum output current of ±60 mA.
Q: What is the board format of the VT 16000-2X-150-A?
A: This model is designed in the 3U board format, making it compatible with standard 19-inch rack systems.
Q: What is the coil resistance of the VT 16000-2X-150-A?
A: The coil resistance for this servo amplifier is specified at 2000 Ω.
Q: What type of connector does the VT 16000-2X-150-A use?
A: The connector used on this unit is Form C with 32 poles, built to the DIN 41612 standard.
Q: What is the relay switch time for the VT 16000-2X-150-A?
A: The relay switch time on the VT 16000-2X-150-A is 1 millisecond.
