VT 15020-1X/HNC-CPU-Einschub
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900020178
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The VT 15020-1X/HNC-CPU-Einschub amplifier card adheres to DIN 41 494 Eurocard standards, operates with a power supply current under 200mA, provides regulated outputs of ±15V, and features dither current at 3 mApp amplitude at 340Hz. Part of the VT 1600 Servo Amplifiers series by Bosch Rexroth Indramat, it weighs approximately 0.15kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the VT 15020-1X/HNC-CPU-Einschub. This VT 15020-1X/HNC-CPU-Einschub amplifier card is designed to work with the VT 1600 Servo Amplifiers series and is 100 x 160 mm in size, as required by the DIN 41 494 Eurocard standard. By guaranteeing compatibility with a wide variety of industrial racking systems, this standard makes it easier to integrate into current control frameworks. The card's front plate has a precise separation of the solder and component sides, indicating careful mechanical design. It is 3U high, or about 128 mm, and 8 HP wide. In industrial control cabinets, the card's small size is essential for optimizing space use.
For the VT 15020-1X/HNC-CPU-Einschub to operate steadily and effectively, its electrical properties are essential. By using a power supply current of less than 200 mA, the card reduces heat production and power consumption in the control system. The card needs a power supply voltage of ±22 to ±28 V when voltage regulators are added. In order to remove these regulators, a controlled supply of ±15 V is required. For linked devices to operate steadily, the card's regulated voltage outputs of ±15 V are essential. Additionally, it has an inbuilt control voltage range of 0 to ±10 V, which enables accurate input of control signals. The card can efficiently drive a variety of loads thanks to its output current capabilities of ±60 mA or ±100 mA, depending on the configuration.
Additionally, the addition of a dither current at 340 Hz with an amplitude of 3 mApp helps to reduce static friction in control valves, improving their precision and responsiveness. Its switching capabilities depend on the relay data, which specifies a nominal coil resistance of 2000 Ω, a duty cycle of 1 ms, and a coil voltage of 22–28 V. The card's storage temperature range of -20 to 70 °C defines its environmental durability and guarantees dependable functioning in a variety of industrial environments. In areas where temperatures fluctuate, this broad temperature tolerance is essential for preserving performance constancy. The card is easy to handle and install because of its weight, which is around 0.15 kg.
Frequently Asked Questions about VT 15020-1X/HNC-CPU-Einschub:
Q: What is the VT 15020-1X/HNC-CPU-Einschub amplifier card?
A: The VT 15020-1X/HNC-CPU-Einschub is an amplifier card from Bosch Rexroth Indramat, part of the VT 1600 Servo Amplifiers series. It is built according to DIN 41 494 Eurocard standards and provides regulated outputs of ±15V when voltage regulators are installed.
Q: What is the power supply requirement for this amplifier card?
A: The amplifier card requires a power supply current of less than 200mA. When voltage regulators are installed, it operates with a power supply voltage between ±22V and ±28V. If the regulators are removed, the card requires a ±15V regulated supply.
Q: What are the output current specifications?
A: The VT 15020-1X/HNC-CPU-Einschub provides an output current of either ±60mA or ±100mA, depending on its configuration. These output levels allow it to drive various loads in industrial automation systems.
Q: What is the dither current feature in this amplifier card?
A: The amplifier card includes a dither current with an amplitude of 3 mApp at a frequency of 340Hz. This feature helps in reducing static friction in control valves, improving their responsiveness.
Q: What are the dimensions and format of this card?
A: The card follows the Eurocard format with dimensions of 100 x 160 mm, adhering to DIN 41 494 standards. Its front plate height is 3U (approximately 128mm or 5.05 inches), while the width is 8 HP.
