VT-VPCD-1-11/V0/1-0-1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901044346
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
37 Seconds
The Bosch Rexroth Indramat VT-VPCD-1-11/V0/1-0-1 drive is part of the VT-VPCD Drives series and operates at 24 VDC with a maximum current consumption of 3.5 Amps. It features an analog output resolution of 10 mV at 11 bits and supports voltage input resistance of 100 kiloohms with a voltage input resolution of 5 mV. The device also offers a current input resolution of 5 microamps at 12 bits and a maximum digital output current of 30 mA.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-VPCD-1-11/V0/1-0-1 is an electronic drive card produced by Bosch Rexroth Indramat for the VT-VPCD Drives series. The card conditions control signals and delivers adjustable analog outputs that command proportional hydraulic valves and other analog-driven actuators within automated machinery. Installed inside a control cabinet, it links PLC voltage or current references to field devices by providing isolated scaling and monitoring functions. This arrangement allows the control system to send low-level reference signals while the card prepares them for stable use by the connected actuator.
The analog stage provides a resolution of 10 mV (11 bit), so each digital step changes the output by only 0.01 V and allows fine command adjustment. An output ripple of ±25 mV limits periodic deviation and helps keep flow or force loops steady during operation. The programmable span reaches ±10 V, which matches common industrial command inputs, and the output must drive a load no lower than 1 kΩ to avoid excessive current demand. Current feedback can be read with a granularity of 5 µA, while the 100 Ω burden on the current input keeps the associated voltage drop low. For voltage feedback paths, the board resolves small changes clearly and accepts the same full-scale range used at the output.
Power and digital sections are sized for cabinet integration. The board operates from a logic supply of 24 VDC, and its embedded regulators draw up to 3.5 A under full load. A single transistorized channel can source 30 mA to operate relays or indicator LEDs, and the same current level is used by the internal reference for external transducers that do not have their own supply. High-impedance sensing is provided by a voltage input resistance of 100 kΩ, which reduces loading on sensitive command circuits. The combination of analog resolution, stable feedback handling, and cabinet-ready power requirements suits proportional hydraulic control and other motion functions that depend on low-noise signal processing.
Frequently Asked Questions about VT-VPCD-1-11/V0/1-0-1:
Q: What is the operating voltage requirement for the VT-VPCD-1-11/V0/1-0-1?
A: The VT-VPCD-1-11/V0/1-0-1 operates with a supply voltage of 24 VDC.
Q: What is the maximum current consumption of the VT-VPCD-1-11/V0/1-0-1?
A: This model can handle a maximum current consumption of 3.5 A.
Q: What is the analog output voltage range of the VT-VPCD-1-11/V0/1-0-1?
A: The device provides an analog output voltage of ±10 V.
Q: What is the minimum analog output load for the VT-VPCD-1-11/V0/1-0-1?
A: A minimum analog output load of 1 kΩ is required for proper operation.
Q: What is the analog output resolution of the VT-VPCD-1-11/V0/1-0-1?
A: The analog output resolution for this model is 10 mV (11 bit).
