VT-MSPA1-21-F5-000-000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901439036
The Bosch Rexroth Indramat VT-MSPA1-21-F5-000-000 is part of the VT-MSPA Drives series and weighs 0.14 kilograms. It operates with a nominal supply voltage of 24 V and supports a maximum solenoid current of 2.7 A. The drive has an IP20 protection class and can function at temperatures from 0 up to 60 degrees Celsius.
Internal Product Review
The VT-MSPA1-21-F5-000-000 is a Bosch Rexroth Indramat VT-MSPA drive module with a 24 V nominal supply and IP20 protection. Operation remains dependable across a 0 to +60 °C ambient range, and start-up in under 1 s supports quick machine readiness. A 2.7 A maximum solenoid current stands out as a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-MSPA1-21-F5-000-000 is a compact drive card produced by Bosch Rexroth Indramat within the VT-MSPA Drives series. Installed in control cabinets, the module conditions low-voltage DC power and feedback signals so that proportional solenoid valves and other motion elements receive stable current, enabling repeatable positioning and pressure control in automated machines and test rigs. Its circuit design, terminal layout, and onboard diagnostics align with the broader family of DIN-rail devices, making the card a plug-in component for distributed industrial automation.
It can operate at site elevations up to 2000 m, and within that height range the cooling margin remains adequate for continuous duty. The permissible ambient span runs from 0 °C to +60 °C, allowing installation in warm panels without forced-air conditioning. Its analog output stage drives loads down to 1000 Ω, which supports precise voltage tracking when interfacing with external monitors. Under a nominal 24 V supply, the board draws <2 A, and total power loss stays below <48 W; these limits help with power-supply sizing and thermal planning. The input supply may vary between 18 V and 36 V, while residual ripple is limited to 2.5 Vpp so the downstream control loops remain stable.
The functional envelope includes a protection rating of IP20, which is suitable for sheltered cabinet mounting. For the solenoid channel, the module can deliver up to 2.7 A of regulated current, and a corresponding external fuse rated at 3.15 A Time-Lag is recommended to isolate faults. Power is available within <1 s after energizing, which helps reduce startup delay. The command current terminals use a 100 Ω input load, and the 0.14 kg mass adds very little weight to modular racks. These operating limits are presented clearly for electrical integration and cabinet installation.
