VT-MSPA1-10-1X-V0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901142355
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-MSPA1-10-1X-V0 is part of the VT-MSPA Drives series and operates with a nominal voltage of 24 V and a maximum power consumption under 48 W. It features a protection class of IP20 and uses 12 spring-type terminals for connections. The drive weighs 0.14 kg and supports a maximum solenoid current of 2.7 A.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat supplies the VT-MSPA1-10-1X-V0 as a compact drive card in the VT-MSPA Drives series. The module is intended to reside on a DIN rail beside valve amplifiers, I/O modules, and small PLCs, forming part of a low-power actuator loop. By conditioning a low-voltage control supply, it produces a regulated current profile for proportional solenoids used inside automated machinery. Its small footprint allows placement inside standard control cabinets alongside PLC and sensor hardware.
During operation, the card expects a supply of 24 V DC, and internal monitoring rejects inputs that exceed 36 V. Within that range, the circuitry draws under 48 W, and continuous consumption stays below 2 A, which limits heat in tight enclosures. To actuate a proportional solenoid, the output stage can deliver 2.7 A, yet inrush current is capped at 4 A to avoid tripping upstream supplies. Voltage ripple must remain under 2.5 Vpp so that the regulated output track remains linear across the full duty band. A permitted temperature ramp of 5 °C per minute guards against thermal shock during rapid plant warm-up or cooldown, and it helps keep offset drift inside the analog stages.
For field wiring, the module provides 12 spring-type terminals, cutting installation time and securing conductors during the specified 1 m free-fall test. Upstream protection is handled with a 3.15 A time-lag fuse, and power-up completes in <1 s, keeping machine sequences tight. The open-frame housing meets IP20, so the card is mounted inside a cabinet and is cleared for service at elevations to 2000 m. Weighing 0.14 kg, it adds negligible load to DIN-rail structures without affecting vibration limits. The spring clamps hold solid or fine-strand leads firmly, and a simple release slot allows fast replacement during maintenance.
Frequently Asked Questions about VT-MSPA1-10-1X-V0:
Q: What type of connection terminals are provided on the VT-MSPA1-10-1X-V0?
A: The VT-MSPA1-10-1X-V0 supports up to 12 spring-type terminal connections for easy wiring.
Q: What external fuse rating is required for the VT-MSPA1-10-1X-V0?
A: This unit is protected by an external 3.15 A time-lag fuse for safety under overload conditions.
Q: What is the nominal operating voltage of the VT-MSPA1-10-1X-V0?
A: The VT-MSPA1-10-1X-V0 has a nominal operating voltage of 24 V, making it suitable for standard industrial power supplies.
Q: What protection class does the VT-MSPA1-10-1X-V0 offer?
A: This model features an IP20 protection class to prevent finger contact and limit ingress of debris.
Q: What is the maximum current consumption of the VT-MSPA1-10-1X-V0?
A: The maximum current consumption of the VT-MSPA1-10-1X-V0 is less than 2 A during operation.
