VT-MSPA1-1-12-V0-0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R900702060
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-MSPA1-1-12-V0-0 is a drive from the VT-MSPA Drives series and uses twelve detachable spring-type terminals for connections. It operates at a nominal voltage of 24 V and has a maximum solenoid current of 2.7 Amps. This drive features a weight of 0.14 kg and is rated IP20 for protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-MSPA1-1-12-V0-0 is a compact single-axis drive card manufactured by Bosch Rexroth Indramat for the VT-MSPA Drives series. It accepts a low-voltage supply and provides regulated current to a proportional solenoid so that hydraulic or pneumatic actuators follow an analog command in automated equipment. With its printed-circuit format, an IP-rated front edge, and detachable terminals, the unit is intended for DIN-rail or backplane installation inside machine control cabinets where repeatable valve positioning is required. Its compact layout also helps it fit control assemblies where panel space is limited and orderly wiring is important.
The drive is powered from a nominal bus of 24 V, while an upper cutoff of 36 V protects internal components from overvoltage events. Under normal operating conditions, the card draws no more than 2 A, and its internal circuitry limits power usage to under 48 W. Output stages can deliver up to 2.7 A of controlled solenoid current, giving the headroom needed for high-force valve coils without additional booster modules. The electronics are housed to the IP20 ingress rating, which is suitable for clean, enclosed environments where finger protection is required. This combination supports stable current regulation while keeping cabinet heat and supply demand within a modest range.
The controller reaches stable operation in less than 1 s after power is applied, allowing the connected valve channel to respond quickly during machine startup. Inrush current stays below 4 A, which reduces stress on upstream protection devices and power supplies. All field connections, including supply, command signal, and solenoid leads, are landed on 12 spring-type terminals that detach as a block, so the wiring interface remains simple and compact. The card is suitable for installations up to 2000 m altitude, and it maintains stable behavior across rapid ambient changes. Low residual output ripple also supports precise solenoid control where smooth actuator response is important.
Frequently Asked Questions about VT-MSPA1-1-12-V0-0:
Q: What type of connection terminals are provided on the VT-MSPA1-1-12-V0-0?
A: The VT-MSPA1-1-12-V0-0 drive uses 12 detachable spring-type terminals for secure and flexible electrical connections.
Q: What is the nominal operating voltage for the VT-MSPA1-1-12-V0-0 drive?
A: This unit operates nominally at 24 V, making it compatible with standard industrial voltage supplies.
Q: What is the maximum solenoid current supplied by the VT-MSPA1-1-12-V0-0?
A: The VT-MSPA1-1-12-V0-0 offers a maximum solenoid current of 2.7 A for connected devices.
Q: What level of environmental protection does the VT-MSPA1-1-12-V0-0 provide?
A: The VT-MSPA1-1-12-V0-0 has a protection class of IP20, which means it is protected against solid objects greater than 12.5 mm but is not water resistant.
Q: What type of external fuse is recommended for the VT-MSPA1-1-12-V0-0 drive?
A: A 3.15 A time-lag external fuse is required for the VT-MSPA1-1-12-V0-0, ensuring safe operation under potential fault conditions.
