VT-MSPA 2-20-F5-000-000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901439038
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
18 Seconds
The Bosch Rexroth Indramat VT-MSPA 2-20-F5-000-000 belongs to the VT-MSPA Drives series and operates with a voltage range from 18 to 36 volts and a maximum power consumption of 48 watts. This device meets the IP20 protection class, supports a solenoid current up to 2.7 Amps, and weighs 0.14 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-MSPA 2-20-F5-000-000 is a plug-in electronic drive card from the VT-MSPA Drives series manufactured by Bosch Rexroth Indramat. It conditions incoming control signals and supplies regulated current to proportional solenoid actuators used in industrial automation assemblies such as flow or pressure control manifolds. With a 0.14 kg housing and a slim DIN-card format, the unit is intended for mounting inside protected electrical enclosures where space and weight are limited. Because it is a plug-in card rather than a standalone housing, it is meant to operate as part of a larger control assembly instead of as a field-mounted device.
The card operates from a nominal supply of 24 V, but its input stage allows excursions up to 36 V and down to 18 V so that brief line variations do not interrupt valve control. Internal circuitry limits power draw to 48 W, which helps determine cabinet heat dissipation and ventilation needs. When driving a valve coil, the output channel can source up to 2.7 A, enabling reliable actuation of medium-sized proportional solenoids without external boosters. These electrical limits are intended for installation heights up to 2,000 m, and the card reaches its operating state in less than one second after startup. This operating behavior supports systems that need a prompt response after the main supply is switched on.
The command input is designed for a load of 100 Ω, while the analog monitor output requires at least 1000 Ω so that feedback voltage is not distorted by downstream devices. The monitor connection can be used for status observation without placing a heavy electrical burden on the feedback circuit. Ripple on the supply is allowed to peak at 2.5 Vpp without upsetting closed-loop current control, which makes the card more tolerant of ordinary DC supply variation. An enclosure rating of IP20 indicates finger-safe construction suited for clean control cabinets. A permitted temperature change of 5 °C per minute helps protect internal components during rapid ambient shifts.
Frequently Asked Questions about VT-MSPA 2-20-F5-000-000:
Q: What is the operating voltage for the VT-MSPA 2-20-F5-000-000 drive?
A: The VT-MSPA 2-20-F5-000-000 operates with a voltage of 24 V.
Q: What is the maximum solenoid current supported by VT-MSPA 2-20-F5-000-000?
A: This model has a maximum solenoid current of 2.7 A.
Q: What is the maximum installation altitude for VT-MSPA 2-20-F5-000-000?
A: The device is rated for use at altitudes up to 2000 meters.
Q: What is the protection class of the VT-MSPA 2-20-F5-000-000?
A: The VT-MSPA 2-20-F5-000-000 is classified under protection class IP20.
Q: How much power does the VT-MSPA 2-20-F5-000-000 consume during operation?
A: Maximum power consumption for this unit is 48 W.
