VT HNC100-SEK-20A/W-24-0-C/V240
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The VT HNC100-SEK-20A/W-24-0-C/V240 is a digital axis controller with a 20 A output current and air cooling capabilities. Manufactured by Bosch Rexroth Indramat, it is part of the VT-HNC Digital Axis Controllers series and supports DIN rail mounting. The device features IP20/IP54 protection and weighs approximately 3 kg.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT HNC100-SEK-20A/W-24-0-C/V240 Bosch Rexroth digital controller assembly is used for the secondary control of axial pistons. This assembly offers closed-loop speed control and open-loop torque control. The product supports DIN rail mounting. This device portrays compatibility with A4VS DS1(E) pistons from its manufacturer. The unit incorporates interfaces to the swivel angle position of tandem or individual pistons. Its WIN-PED 6.6 software features open-loop control, monitoring, and closed-loop control functions. This assembly has several monitoring functions like too high acceleration and overspeed.
The product installation takes place only vertically. This device is integrated with a 32-bit power PC processor. The unit features +10 V / +/-25 mV reference voltage per axis electronics. Its digital position transducers function as encoders. This assembly has to be handled only by people with the relevant expertise. The product surface tends to become very hot when it is in use. This device installation can never be done near power electronics such as frequency converters. The unit has to be installed as close as possible to its power supply. Its connection must be as short as possible by laying its forward and return conductors together.
This assembly housing has an earthing that is established by connecting its mounting bolts with the rear panel of its control cabinet. The product has a mass of 960 g. This device comprises analog and digital inputs and outputs. The unit visualization and parameterization processes are carried out using a PC through a serial interface. Its digital outputs can function as switching outputs. This digital controller assembly-related software must be downloaded from the manufacturer’s website. The product delivers a cable break monitoring function for the encoder as well as swivel angle transducers This device has two analog channels. The unit supports the connection of up to 20 digital outputs. Its signal lines must not be run parallel to the load lines.
Frequently Asked Questions about VT HNC100-SEK-20A/W-24-0-C/V240:
Q: What processor does the VT HNC100-SEK-20A/W-24-0-C/V240 assembly have?
A: The VT HNC100-SEK-20A/W-24-0-C/V240 assembly has a 32-bit power PC.
Q: What is the operating voltage of the VT HNC100-SEK-20A/W-24-0-C/V240 assembly?
A: The operating voltage of the VT HNC100-SEK-20A/W-24-0-C/V240 assembly is 18 VDC to 30 VDC.
Q: What kind of analog voltage inputs does the VT HNC100-SEK-20A/W-24-0-C/V240 assembly have?
A: The VT HNC100-SEK-20A/W-24-0-C/V240 assembly has differential analog voltage inputs.
Q: What type of mounting does the VT HNC100-SEK-20A/W-24-0-C/V240 assembly support?
A: The VT HNC100-SEK-20A/W-24-0-C/V240 assembly supports 35 mm top hat rail mounting.
Q: What are the system requirements for the software of the VT HNC100-SEK-20A/W-24-0-C/V240 assembly?
A: The system requirements for the software of the VT HNC100-SEK-20A/W-24-0-C/V240 assembly are an IBM PC, 512 MB RAM, 100 MB hard disk capacity, and Windows 7/XP operating system.
