VT-HNC100-4-3X-P-I-E0-G04 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901263149
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat VT-HNC100-4-3X-P-I-E0-G04 belongs to the VT-HNC Digital Axis Controllers series and is designed for controlling four hydraulic axes. It offers control modes for position, pressure, force, and velocity and supports up to 20 digital outputs. The unit features two Ethernet ports supporting TCP/IP, a 15-pin encoder connector, and has a protection class rating of IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-4-3X-P-I-E0-G04 digital axis controller is built by Bosch Rexroth Indramat and belongs to the VT-HNC Digital Axis Controllers series. It is a DIN rail-mounted unit that supervises proportional or servo-hydraulic actuators through onboard closed-loop control. By calculating valve commands in real time, the controller aligns cylinder displacement, hydraulic pressure, or drive velocity with programmed setpoints and provides a compact interface between field sensors and the central PLC. This allows hydraulic axes to respond quickly to changing commands and process conditions without moving control tasks to separate hardware.
Internally, the unit is configured for 4 hydraulic axes, so one controller can coordinate multiple movements without external junction cards. Four selectable control modes—position, pressure, force, and velocity—can be assigned per channel to match the application. Each electronics slot offers 11 digital inputs, and up to 20 digital outputs are available for valve enable, alarm, or lamp functions. Feedback is accepted through a 15-pin encoder connector, and the logic electronics are supplied with +5 V. Although it is delivered without a bus coupling module, two front-panel Ethernet jacks provide 2 TCP/IP service lines for setup or diagnostics. This arrangement lets the controller manage feedback processing and discrete machine signals within the same housing. The controller is part of component series 3 within the HNC100 line.
Field wiring is supplemented by a 9-pin Profibus connector for legacy fieldbus exchange and an internal reference source of +10 V for analog position sensors. External transducers and pressure switches can share the integrated +24 V sensor supply, which simplifies cabinet wiring. The enclosure carries an IP20 rating, so it has finger-safe terminals and is intended for installation in a closed cabinet. With a compact 35 mm rail width, the controller fits standard DIN rails and helps keep panel depth low. When used with incremental or SSI transducers, the axis controller performs automatic scaling to maintain commanded resolution across the full stroke. That scaling function helps keep position feedback consistent when different transducer types are used on separate axes.
Frequently Asked Questions about VT-HNC100-4-3X-P-I-E0-G04:
Q: How many hydraulic axes can the VT-HNC100-4-3X-P-I-E0-G04 controller manage?
A: The VT-HNC100-4-3X-P-I-E0-G04 controller is designed to support up to four hydraulic axes.
Q: How many Ethernet ports are available on the VT-HNC100-4-3X-P-I-E0-G04 and what is their function?
A: This controller is equipped with two Ethernet ports supporting TCP/IP for communication and configuration.
Q: Which control modes are supported by the VT-HNC100-4-3X-P-I-E0-G04?
A: The VT-HNC100-4-3X-P-I-E0-G04 supports control modes for position, pressure, force, and velocity.
Q: What is the protection class rating of the VT-HNC100-4-3X-P-I-E0-G04 controller?
A: This model features a protection class of IP20, meaning it is protected against solid objects larger than 12.5 mm but is not waterproof.
Q: What is the maximum number of digital outputs on the VT-HNC100-4-3X-P-I-E0-G04?
A: The maximum number of digital outputs available on this model is 20, allowing for versatile automation tasks.
