VT-HNC100-4-3X/P-I-E0/000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R901254693
The Bosch Rexroth Indramat VT-HNC100-4-3X/P-I-E0/000 is part of the VT-HNC Digital Axis Controllers series and is designed for controlling four hydraulic axes. It features 4 analog I/O slots, 4 digital I/O slots, and supports up to 20 digital outputs with a supply voltage range of 18 to 30 VDC. This controller is rated for IP20 protection and includes two Ethernet ports with a TCP/IP service interface.
Internal Product Review
The VT-HNC100-4-3X/P-I-E0/000 is a digital axis controller configured for 4 hydraulic axes with IP20 protection. Incremental/SSI position feedback and a TCP/IP service interface make commissioning and diagnostics especially effective in electrohydraulic applications. Dual Ethernet ports add useful connectivity, making this controller a strong choice for precise multi-axis hydraulic control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-4-3X/P-I-E0/000 is a digital axis controller produced by Bosch Rexroth Indramat within the VT-HNC Digital Axis Controllers series. Intended for electrohydraulic automation, it executes numerical motion control algorithms, supervises valve actuation, and gathers sensor data so that multi-axis machines can run repeatable cycles. The unit mounts on a DIN rail inside a control cabinet, where its Ethernet interfaces connect the hydraulic section to supervisory PLC networks and configuration workstations.
The controller supports 4 hydraulic axes, and each axis has 11 configurable digital channels for reading limit signals or driving solenoids. An operating voltage of 18–30 VDC accommodates the standard 24 V supply used in control panels and allows moderate voltage drops along the feed conductors. The IP20 enclosure rating indicates that live parts are protected against finger contact, but the controller must be installed inside a closed cabinet. Configuration is performed through a service port that supports TCP/IP, enabling parameter access through standard network tools.
Position feedback is accepted through incremental and SSI interfaces, and the backplane has 4 encoder slots so each hydraulic axis can use a dedicated transducer. Up to 20 digital outputs are available for pump contactors, interlocks, or status lamps, while the board includes 2 Ethernet ports for line or switched network connections. Additional resources include four analog I/O slots, two current inputs per axis for pressure transducers, and two voltage inputs per axis for displacement sensors. The permitted storage temperature ranges from -20 °C to +70 °C. The controller is supplied without a bus connection module or an inductive position sensor, allowing the appropriate field components to be selected for the intended installation.
