VT-HNC100-4-33/N-I-00/000 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat VT-HNC100-4-33/N-I-00/000 is part of the VT-HNC Digital Axis Controllers series and is designed for controlling up to four hydraulic axes. This digital controller provides 2 current input and 2 voltage input channels per axis, along with 11 digital I/O per axis and a maximum of 20 digital outputs.
Internal Product Review
The VT-HNC100-4-33/N-I-00/000 is a digital axis controller configured for 4 hydraulic axes. With 11 digital I/O per axis and 2 current input channels per axis, the controller offers impressive flexibility for demanding hydraulic control schemes. A well-executed platform for precise multi-axis operation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VT-HNC100-4-33/N-I-00/000 is a digital axis controller from Bosch Rexroth Indramat and belongs to the VT-HNC Digital Axis Controllers series. This build is intended to coordinate closed-loop position and force tasks across multiple hydraulic axes. Suitable applications include presses, injection units, and handling gantries in automated plants, where the controller processes feedback and adjusts connected hydraulic valves to maintain commanded motion.
Its control core addresses 4 independent axes. For each axis, the controller provides two voltage input channels that accept ±10 V command or feedback signals and 2 current input channels per axis for devices such as pressure transducers. Command signals are delivered through 1 current output per axis for compatible 0–20 mA valve drives. Two voltage output channels per axis reproduce the computed setpoints, allowing an external oscilloscope or drive card to receive the same reference. The controller also provides 11 digital I/O points per axis for interlocks and status reporting. Because the unit has no bus connection, these local terminals form the primary interface between the controller and the machine. This arrangement supports direct wiring of analog sensors, valve electronics, switches, and signaling devices without requiring a fieldbus network.
The controller uses component release 3 and belongs to the Digital NC control HNC100 product family. Its control functions are suited to hydraulic motion profiles that require coordinated position and force regulation. Up to 20 configurable digital outputs can actuate pumps, relays, alarm beacons, or other connected devices. Providing these outputs inside the base unit helps consolidate wiring that might otherwise require external relay cards. The controller includes no sensor for inductive position measurement, so an external LVDT or magnetostrictive probe must supply position feedback through an available analog input. The remaining channels can accommodate other machine signals, including pressure feedback, operating states, interlocks, and diagnostic indicators. This input and output arrangement allows the controller to manage axis commands and auxiliary machine functions from the same unit while keeping each signal available through a dedicated local connection.
